C:\Users\jmg11
λ ssh admin@10.4.79.107
admin@10.4.79.107's password:
show log system"Warning: CLI module is running in a degraded state.  Configuration, write memory, and support command are disabled; please debug with caution.

show tech-support and show tech-support supplemental are the two most useful outputs to collect for any kind of troubleshooting session.

f0:5c:19:ca:1d:c8# show log system

Aug 26 14:32:28  cli[9953]: <341317> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Regulatory table file init at version 1.0_52858, build Dec 6,2015.
Aug 26 14:32:28  cli[9953]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Extended ssid enabled
Aug 26 14:32:28  cli[9953]: <341207> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  AP support up to 16 SSID.
Aug 26 14:32:28  cli[9953]: <341172> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Find enet0 name eth0.
Aug 26 14:32:29  cli[9953]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Aug 26 14:32:29  cli[9953]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink Ethernet 0.
Aug 26 14:32:29  cli[9953]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state INIT->LOAD.
Aug 26 14:32:29  cli[9953]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink Wifi-sta 6.
Aug 26 14:32:29  cli[9953]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink 3G/4G 7.
Aug 26 14:32:29  cli[9953]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink  type Dummy, state INIT->LOAD.
Aug 26 14:32:30  cli[9953]: <341174> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  No current uplink, pick the highest one - Ethernet eth0.
Aug 26 14:32:30  cli[9953]: <341263> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  enable uplink eth0.
Aug 26 14:32:30  cli[9953]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state LOAD->PROBE.
Aug 26 14:32:30  cli[9953]: <341265> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  enable ethernet uplink eth0.
Aug 26 14:32:30  cli[9953]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  the ethernet uplink inuse in first time, get ip address.
Aug 26 14:32:30  cli[9953]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state PROBE->UP.
Aug 26 14:32:30  cli[9953]: <341185> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Retrieving ip address from br0, ip 10.4.79.107, mask 255.255.255.0.
Aug 26 14:32:30  cli[9953]: <341274> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Update election ip from br0, election ip 10.4.79.107/255.255.255.0.
Aug 26 14:32:30  cli[9953]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  build_my_ip_address: old ip and new ip same; skipping
Aug 26 14:32:30  cli[9953]: <341006> <CRIT> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Sending uplink_up msg to sapd
Aug 26 14:32:30  cli[9953]: <341006> <CRIT> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  trap uplink info.
Aug 26 14:32:30  cli[9953]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  last uplink is null, it's the first uplink, ignore this trap.
Aug 26 14:32:30  cli[9953]: <341173> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Current uplink set to Ethernet, state UP.

Aug 26 14:32:30  cli[9953]: <341135> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Aug 26 14:32:31  cli[9953]: <341135> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Aug 26 14:32:34  cli[9953]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Swarm State Change from Found to Image-ok

Aug 26 14:32:39  cli[9953]: <341194> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Loading configuration, func swarm_timer_handler, line 9864.
Aug 26 14:32:39  cli[9953]: <341005> <ERRS> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  CONFIG READ: Failed to retrieve backup configuration.
Aug 26 14:32:48  nanny[3860]: <303073> <ERRS> |AP f0:5c:19:ca:1d:c8@10.4.79.107 nanny|  Process /aruba/bin/cli [pid 9953] died: got signal SIGSEGV
Aug 26 14:32:48  nanny[3860]: <303079> <ERRS> |AP f0:5c:19:ca:1d:c8@10.4.79.107 nanny|  Restarted process /aruba/bin/cli, new pid 10311
Aug 26 14:32:58  cli[10311]: <341317> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Regulatory table file init at version 1.0_52858, build Dec 6,2015.

Aug 26 14:32:58  cli[10311]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Extended ssid enabled
Aug 26 14:32:58  cli[10311]: <341207> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  AP support up to 16 SSID.
Aug 26 14:32:58  cli[10311]: <341172> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Find enet0 name eth0.
Aug 26 14:32:59  cli[10311]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Aug 26 14:32:59  cli[10311]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink Ethernet 0.
Aug 26 14:32:59  cli[10311]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state INIT->LOAD.
Aug 26 14:32:59  cli[10311]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink Wifi-sta 6.
Aug 26 14:32:59  cli[10311]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink 3G/4G 7.
Aug 26 14:32:59  cli[10311]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink  type Dummy, state INIT->LOAD.
Aug 26 14:33:00  cli[10311]: <341174> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  No current uplink, pick the highest one - Ethernet eth0.
Aug 26 14:33:00  cli[10311]: <341263> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  enable uplink eth0.
Aug 26 14:33:00  cli[10311]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state LOAD->PROBE.
Aug 26 14:33:00  cli[10311]: <341265> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  enable ethernet uplink eth0.
Aug 26 14:33:00  cli[10311]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  the ethernet uplink inuse in first time, get ip address.
Aug 26 14:33:00  cli[10311]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state PROBE->UP.
Aug 26 14:33:00  cli[10311]: <341185> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Retrieving ip address from br0, ip 10.4.79.107, mask 255.255.255.0.
Aug 26 14:33:00  cli[10311]: <341274> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Update election ip from br0, election ip 10.4.79.107/255.255.255.0.
Aug 26 14:33:00  cli[10311]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  build_my_ip_address: old ip and new ip same; skipping
Aug 26 14:33:00  cli[10311]: <341006> <CRIT> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Sending uplink_up msg to sapd
Aug 26 14:33:00  cli[10311]: <341006> <CRIT> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  trap uplink info.
Aug 26 14:33:00  cli[10311]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  last uplink is null, it's the first uplink, ignore this trap.
Aug 26 14:33:00  cli[10311]: <341173> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Current uplink set to Ethernet, state UP.
Aug 26 14:33:00  cli[10311]: <341135> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Aug 26 14:33:01  cli[10311]: <341135> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Aug 26 14:33:04  cli[10311]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Swarm State Change from Found to Image-ok
Aug 26 14:33:09  cli[10311]: <341194> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Loading configuration, func swarm_timer_handler, line 9864.
Aug 26 14:33:09  cli[10311]: <341005> <ERRS> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  CONFIG READ: Failed to retrieve backup configuration.
Aug 26 14:33:18  nanny[3860]: <303073> <ERRS> |AP f0:5c:19:ca:1d:c8@10.4.79.107 nanny|  Process /aruba/bin/cli [pid 10311] died: got signal SIGSEGV
Aug 26 14:33:18  nanny[3860]: <303079> <ERRS> |AP f0:5c:19:ca:1d:c8@10.4.79.107 nanny|  Restarted process /aruba/bin/cli, new pid 10655
Aug 26 14:33:28  cli[10655]: <341317> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Regulatory table file init at version 1.0_52858, build Dec 6,2015.
Aug 26 14:33:28  cli[10655]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Extended ssid enabled

ID.
Aug 26 14:33:28  cli[10655]: <341172> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Find enet0 name eth0.
Aug 26 14:33:28  cli[10655]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Aug 26 14:33:28  cli[10655]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink Ethernet 0.
Aug 26 14:33:28  cli[10655]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state INIT->LOAD.
Aug 26 14:33:28  cli[10655]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink Wifi-sta 6.
Aug 26 14:33:28  cli[10655]: <341169> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Add uplink 3G/4G 7.
Aug 26 14:33:28  cli[10655]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink  type Dummy, state INIT->LOAD.
Aug 26 14:33:29  cli[10655]: <341174> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  No current uplink, pick the highest one - Ethernet eth0.
Aug 26 14:33:29  cli[10655]: <341263> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  enable uplink eth0.
Aug 26 14:33:29  cli[10655]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state LOAD->PROBE.
Aug 26 14:33:29  cli[10655]: <341265> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  enable ethernet uplink eth0.
Aug 26 14:33:29  cli[10655]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  the ethernet uplink inuse in first time, get ip address.
Aug 26 14:33:29  cli[10655]: <341167> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Uplink eth0 type Ethernet, state PROBE->UP.
Aug 26 14:33:29  cli[10655]: <341185> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Retrieving ip address from br0, ip 10.4.79.107, mask 255.255.255.0.
Aug 26 14:33:29  cli[10655]: <341274> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Update election ip from br0, election ip 10.4.79.107/255.255.255.0.
Aug 26 14:33:29  cli[10655]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  build_my_ip_address: old ip and new ip same; skipping
Aug 26 14:33:29  cli[10655]: <341006> <CRIT> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Sending uplink_up msg to sapd
Aug 26 14:33:29  cli[10655]: <341006> <CRIT> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  trap uplink info.
Aug 26 14:33:29  cli[10655]: <341004> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  last uplink is null, it's the first uplink, ignore this trap.
Aug 26 14:33:29  cli[10655]: <341173> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Current uplink set to Ethernet, state UP.
Aug 26 14:33:29  cli[10655]: <341135> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Aug 26 14:33:31  cli[10655]: <341135> <WARN> |AP f0:5c:19:ca:1d:c8@10.4.79.107 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
f0:5c:19:ca:1d:c8#