*********************************************************************************************************
 11/23/2016 10:37:45 AM    Target: 9c:1c:12:ca:81:0a    Command: show log system 
*********************************************************************************************************

Nov 23 18:30:10  syslog: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a: |  terminal access is enabled but dropbear is not running, starting
Nov 23 18:30:14  nanny[1840]: <303022> <WARN> |AP 9c:1c:12:ca:81:0a: |  Reboot Reason: AP rebooted Wed Nov 23 18:28:16 UTC 2016; UI cmd at uptime 0D 16H 0M 47S: reload 
Nov 23 18:30:24  cli[1916]: <341317> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Regulatory table file init at version 1.0_54672, build Apr 18,2016.
Nov 23 18:30:28  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Extended ssid enabled
Nov 23 18:30:28  cli[1916]: <341207> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  AP support up to 8 SSID.
Nov 23 18:30:29  cli[1916]: <341172> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Find enet0 name bond0.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli starting, clearing any dpimgr
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Ethernet 0.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Wifi-sta 6.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink 3G/4G 7.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink  type Dummy, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  receive sapd hello for process recovery
Nov 23 18:30:30  cli[1916]: <341174> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  No current uplink, pick the highest one - Ethernet bond0.
Nov 23 18:30:30  cli[1916]: <341263> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable uplink bond0.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state LOAD->PROBE.
Nov 23 18:30:30  cli[1916]: <341265> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable ethernet uplink bond0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  the ethernet uplink inuse in first time, get ip address.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state PROBE->UP.
Nov 23 18:30:30  cli[1916]: <341185> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Retrieving ip address from br0, ip 192.168.1.247, mask 255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341274> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Update election ip from br0, election ip 192.168.1.247/255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  build_my_ip_address: old ip and new ip same; skipping
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Sending uplink_up msg to sapd
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  trap uplink info.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  last uplink is null, it's the first uplink, ignore this trap.
Nov 23 18:30:30  cli[1916]: <341173> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Current uplink set to Ethernet, state UP.
Nov 23 18:30:30  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Nov 23 18:30:30  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:30:31  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Nov 23 18:30:34  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Found to Image-ok


Nov 23 18:30:39  cli[1916]: <341194> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Loading configuration, func swarm_timer_handler, line 8664.
Nov 23 18:30:40  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Not enabling factory SSID
Nov 23 18:30:41  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Image-ok to Complete
Nov 23 18:30:42  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:31:38  cli[1916]: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  APAS provision failed, code: fail-prov-no-rule
Nov 23 18:31:51  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Activate failed, enabling factory SSID
Nov 23 18:32:41  cli[1916]: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  APAS provision failed, code: fail-prov-no-rule
Nov 23 18:34:44  cli[1916]: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  APAS provision failed, code: fail-prov-no-rule

*********************************************************************************************************
 11/23/2016 10:32:48 AM    Target: 9c:1c:12:ca:81:0a    Command: show log system 
*********************************************************************************************************

Nov 23 18:30:10  syslog: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a: |  terminal access is enabled but dropbear is not running, starting
Nov 23 18:30:14  nanny[1840]: <303022> <WARN> |AP 9c:1c:12:ca:81:0a: |  Reboot Reason: AP rebooted Wed Nov 23 18:28:16 UTC 2016; UI cmd at uptime 0D 16H 0M 47S: reload 
Nov 23 18:30:24  cli[1916]: <341317> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Regulatory table file init at version 1.0_54672, build Apr 18,2016.
Nov 23 18:30:28  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Extended ssid enabled
Nov 23 18:30:28  cli[1916]: <341207> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  AP support up to 8 SSID.
Nov 23 18:30:29  cli[1916]: <341172> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Find enet0 name bond0.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli starting, clearing any dpimgr
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Ethernet 0.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Wifi-sta 6.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink 3G/4G 7.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink  type Dummy, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  receive sapd hello for process recovery
Nov 23 18:30:30  cli[1916]: <341174> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  No current uplink, pick the highest one - Ethernet bond0.
Nov 23 18:30:30  cli[1916]: <341263> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable uplink bond0.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state LOAD->PROBE.
Nov 23 18:30:30  cli[1916]: <341265> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable ethernet uplink bond0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  the ethernet uplink inuse in first time, get ip address.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state PROBE->UP.
Nov 23 18:30:30  cli[1916]: <341185> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Retrieving ip address from br0, ip 192.168.1.247, mask 255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341274> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Update election ip from br0, election ip 192.168.1.247/255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  build_my_ip_address: old ip and new ip same; skipping
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Sending uplink_up msg to sapd
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  trap uplink info.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  last uplink is null, it's the first uplink, ignore this trap.
Nov 23 18:30:30  cli[1916]: <341173> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Current uplink set to Ethernet, state UP.
Nov 23 18:30:30  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Nov 23 18:30:30  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:30:31  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Nov 23 18:30:34  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Found to Image-ok


Nov 23 18:30:39  cli[1916]: <341194> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Loading configuration, func swarm_timer_handler, line 8664.
Nov 23 18:30:40  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Not enabling factory SSID
Nov 23 18:30:41  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Image-ok to Complete
Nov 23 18:30:42  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:31:38  cli[1916]: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  APAS provision failed, code: fail-prov-no-rule
Nov 23 18:31:51  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Activate failed, enabling factory SSID
Nov 23 18:32:41  cli[1916]: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  APAS provision failed, code: fail-prov-no-rule

*********************************************************************************************************
 11/23/2016 10:32:25 AM    Target: 9c:1c:12:ca:81:0a    Command: show log system 
*********************************************************************************************************

Nov 23 18:30:10  syslog: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a: |  terminal access is enabled but dropbear is not running, starting
Nov 23 18:30:14  nanny[1840]: <303022> <WARN> |AP 9c:1c:12:ca:81:0a: |  Reboot Reason: AP rebooted Wed Nov 23 18:28:16 UTC 2016; UI cmd at uptime 0D 16H 0M 47S: reload 
Nov 23 18:30:24  cli[1916]: <341317> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Regulatory table file init at version 1.0_54672, build Apr 18,2016.
Nov 23 18:30:28  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Extended ssid enabled
Nov 23 18:30:28  cli[1916]: <341207> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  AP support up to 8 SSID.
Nov 23 18:30:29  cli[1916]: <341172> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Find enet0 name bond0.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli starting, clearing any dpimgr
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Ethernet 0.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Wifi-sta 6.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink 3G/4G 7.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink  type Dummy, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  receive sapd hello for process recovery
Nov 23 18:30:30  cli[1916]: <341174> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  No current uplink, pick the highest one - Ethernet bond0.
Nov 23 18:30:30  cli[1916]: <341263> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable uplink bond0.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state LOAD->PROBE.
Nov 23 18:30:30  cli[1916]: <341265> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable ethernet uplink bond0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  the ethernet uplink inuse in first time, get ip address.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state PROBE->UP.
Nov 23 18:30:30  cli[1916]: <341185> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Retrieving ip address from br0, ip 192.168.1.247, mask 255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341274> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Update election ip from br0, election ip 192.168.1.247/255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  build_my_ip_address: old ip and new ip same; skipping
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Sending uplink_up msg to sapd
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  trap uplink info.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  last uplink is null, it's the first uplink, ignore this trap.
Nov 23 18:30:30  cli[1916]: <341173> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Current uplink set to Ethernet, state UP.
Nov 23 18:30:30  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Nov 23 18:30:30  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:30:31  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Nov 23 18:30:34  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Found to Image-ok


Nov 23 18:30:39  cli[1916]: <341194> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Loading configuration, func swarm_timer_handler, line 8664.
Nov 23 18:30:40  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Not enabling factory SSID
Nov 23 18:30:41  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Image-ok to Complete
Nov 23 18:30:42  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:31:38  cli[1916]: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  APAS provision failed, code: fail-prov-no-rule
Nov 23 18:31:51  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Activate failed, enabling factory SSID

*********************************************************************************************************
 11/23/2016 10:32:06 AM    Target: 9c:1c:12:ca:81:0a    Command: show log system 
*********************************************************************************************************

Nov 23 18:30:10  syslog: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a: |  terminal access is enabled but dropbear is not running, starting
Nov 23 18:30:14  nanny[1840]: <303022> <WARN> |AP 9c:1c:12:ca:81:0a: |  Reboot Reason: AP rebooted Wed Nov 23 18:28:16 UTC 2016; UI cmd at uptime 0D 16H 0M 47S: reload 
Nov 23 18:30:24  cli[1916]: <341317> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Regulatory table file init at version 1.0_54672, build Apr 18,2016.
Nov 23 18:30:28  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Extended ssid enabled
Nov 23 18:30:28  cli[1916]: <341207> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  AP support up to 8 SSID.
Nov 23 18:30:29  cli[1916]: <341172> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Find enet0 name bond0.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli starting, clearing any dpimgr
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Ethernet 0.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Wifi-sta 6.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink 3G/4G 7.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink  type Dummy, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  receive sapd hello for process recovery
Nov 23 18:30:30  cli[1916]: <341174> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  No current uplink, pick the highest one - Ethernet bond0.
Nov 23 18:30:30  cli[1916]: <341263> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable uplink bond0.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state LOAD->PROBE.
Nov 23 18:30:30  cli[1916]: <341265> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable ethernet uplink bond0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  the ethernet uplink inuse in first time, get ip address.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state PROBE->UP.
Nov 23 18:30:30  cli[1916]: <341185> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Retrieving ip address from br0, ip 192.168.1.247, mask 255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341274> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Update election ip from br0, election ip 192.168.1.247/255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  build_my_ip_address: old ip and new ip same; skipping
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Sending uplink_up msg to sapd
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  trap uplink info.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  last uplink is null, it's the first uplink, ignore this trap.
Nov 23 18:30:30  cli[1916]: <341173> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Current uplink set to Ethernet, state UP.
Nov 23 18:30:30  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Nov 23 18:30:30  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:30:31  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Nov 23 18:30:34  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Found to Image-ok


Nov 23 18:30:39  cli[1916]: <341194> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Loading configuration, func swarm_timer_handler, line 8664.
Nov 23 18:30:40  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Not enabling factory SSID
Nov 23 18:30:41  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Image-ok to Complete
Nov 23 18:30:42  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:31:38  cli[1916]: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  APAS provision failed, code: fail-prov-no-rule
Nov 23 18:31:51  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Activate failed, enabling factory SSID

*********************************************************************************************************
 11/23/2016 10:31:30 AM    Target: 9c:1c:12:ca:81:0a    Command: show log system 
*********************************************************************************************************

Nov 23 18:30:10  syslog: <341005> <ERRS> |AP 9c:1c:12:ca:81:0a: |  terminal access is enabled but dropbear is not running, starting
Nov 23 18:30:14  nanny[1840]: <303022> <WARN> |AP 9c:1c:12:ca:81:0a: |  Reboot Reason: AP rebooted Wed Nov 23 18:28:16 UTC 2016; UI cmd at uptime 0D 16H 0M 47S: reload 
Nov 23 18:30:24  cli[1916]: <341317> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Regulatory table file init at version 1.0_54672, build Apr 18,2016.
Nov 23 18:30:28  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Extended ssid enabled
Nov 23 18:30:28  cli[1916]: <341207> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  AP support up to 8 SSID.
Nov 23 18:30:29  cli[1916]: <341172> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Find enet0 name bond0.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli starting, clearing any dpimgr
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Ethernet 0.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink Wifi-sta 6.
Nov 23 18:30:29  cli[1916]: <341169> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Add uplink 3G/4G 7.
Nov 23 18:30:29  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink  type Dummy, state INIT->LOAD.
Nov 23 18:30:29  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  receive sapd hello for process recovery
Nov 23 18:30:30  cli[1916]: <341174> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  No current uplink, pick the highest one - Ethernet bond0.
Nov 23 18:30:30  cli[1916]: <341263> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable uplink bond0.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state LOAD->PROBE.
Nov 23 18:30:30  cli[1916]: <341265> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  enable ethernet uplink bond0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  the ethernet uplink inuse in first time, get ip address.
Nov 23 18:30:30  cli[1916]: <341167> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Uplink bond0 type Ethernet, state PROBE->UP.
Nov 23 18:30:30  cli[1916]: <341185> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Retrieving ip address from br0, ip 192.168.1.247, mask 255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341274> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Update election ip from br0, election ip 192.168.1.247/255.255.255.0.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  build_my_ip_address: old ip and new ip same; skipping
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Sending uplink_up msg to sapd
Nov 23 18:30:30  cli[1916]: <341006> <CRIT> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  trap uplink info.
Nov 23 18:30:30  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  last uplink is null, it's the first uplink, ignore this trap.
Nov 23 18:30:30  cli[1916]: <341173> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Current uplink set to Ethernet, state UP.
Nov 23 18:30:30  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Nov 23 18:30:30  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.
Nov 23 18:30:31  cli[1916]: <341135> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Nov 23 18:30:34  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Found to Image-ok


Nov 23 18:30:39  cli[1916]: <341194> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Loading configuration, func swarm_timer_handler, line 8664.
Nov 23 18:30:40  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Not enabling factory SSID
Nov 23 18:30:41  cli[1916]: <341004> <WARN> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  Swarm State Change from Image-ok to Complete
Nov 23 18:30:42  cli[1916]: <341108> <ERRS> |AP 9c:1c:12:ca:81:0a@192.168.1.247 cli|  sess_validate_sid_core: 178 invalid session client-192.168.1.7 sid-pEyyi8I7jakZUwwB430X.