C:\Users\jmg11 λ ssh admin@10.4.79.107 admin@10.4.79.107's password: Warning: CLI module is running in a degraded state. Configuration, write memory, and support command are disabled; please debug with caution. show tech-support and show tech-support supplemental are the two most useful outputs to collect for any kind of troubleshooting session. f0:5c:19:ca:1d:c8# show log driver ion through module param (umac.ko) [ 96.330271] OL_ACBKMinfree : 0 [ 96.330271] OL_ACBEMinfree : 0 [ 96.330271] OL_ACVIMinfree : 0 [ 96.330271] OL_ACVOMinfree : 0 [ 96.330303] ol_ath_attach() BMI inited. [ 96.330396] ol_ath_attach() BMI Get Target Info. [ 96.330396] ol_ath_attach() TARGET TYPE: 9 Vers 0x1000000 [ 96.330396] [ 96.330396] CE WAR Disabled [ 96.330552] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 [ 96.330740] ol_ath_attach() configure Target . [ 96.330834] [ 96.330834] Target Version is 1000000 [ 96.330834] [ 96.330834] Flash Download Address c0000 [ 96.330834] ol_transfer_bin_file: flash data file defined [ 96.330834] Cal location [1]: 00004000 [ 96.330865] [ 96.330865] Wifi1 Select OFFSET 5000 [ 96.349671] qc98xx_verify_checksum: flash checksum passed: 0xc9ff [ 96.349671] ol_transfer_bin_file 3085: Download Flash data len 12064 [ 96.349859] Board extended Data download address: 0x0 [ 96.370196] [ 96.370196] Board data initialized [ 96.370353] Flash download ADDRESS 0xc0000 [ 96.370353] [ 96.370353] Selecting OTP binary for CHIP Version 1 [ 96.402780] [ 96.402780] First OTP send param 8000 [ 101.016651] ol_ath_download_firmware :First OTP download and Execute is good return param 34816 [ 101.016682] [ 101.016682] ##Board Id 2 [ 101.016682] [ 101.016682] ##CHIP Id 1 [ 101.016776] [ 101.016776] BOARDDATA DOWNLOAD TO address c0000 [ 101.016776] [ 101.016776] wifi1 Select filename boardData_AR900B_CUS260_2G_v2_002.bin [ 101.016807] ol_transfer_bin_file: Board data file: boardData_AR900B_CUS260_2G_v2_002.bin ARXXXX v=0x1 [ 101.016963] Board extended Data download address: 0x0 [ 101.037488] ol_ath_download_firmware: Using 0x1234 for the remainder of init [ 101.037488] [ 101.037488] Selecting OTP binary for CHIP Version 1 [ 101.069884] [ 101.069884] Second otp download Param 10000 [ 105.691377] ol_ath_download_firmware : OTP download and Execute is good [ 105.691408] [ 105.691408] FIRMWARE : Beeliner CHIP Version 1 [ 105.691502] ol_swap_seg_alloc: Successfully allocated memory for SWAP size=131072 [ 105.691596] Swap: bytes_left to copy: fw:16; dma_page:25179 [ 105.691596] Swap: wrong length read:0 [ 105.691627] ol_swap_wlan_memory_expansion: Swap total_bytes copied: 105893 Target address 4179e8 [ 105.691690] scn=dd600540 target_write_addr=4179e8 seg_info=ddff6a10 [ 105.691690] ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 [ 105.691690] bin_filename=athwlan_v2.bin swap_filename=/aruba/bin/athwlan_v2.codeswap.bin [ 106.790534] ol_ath_attach() Download FW. [ 106.790565] ol_ath_attach() HT Create . [ 106.790565] ol_ath_attach() HIF Claim. [ 106.790627] ol_ath_attach() BMI Done. [ 106.790659] ol_ath_attach() WMI attached. wmi_handle dd6a0000 [ 106.793939] CE_recv_buf_enqueue 814 Populate last entry 512 for CE 5 [ 106.793939] CE_recv_buf_enqueue 823 CE 5 wi 511 dest_ptr 0x58806040 nbytes 0 recv_ctxt 0xd8a8dc80 [ 106.796313] [ 106.796313] <=== cfg max peer id 1056 ====> [ 106.803498] CE_pkt_dl_len_set CE 4 Pkt download length 64 [ 106.803530] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from d64c0000 [ 106.887035] [ 106.887035] SERIAL NUMBER: NHQGG0201329X01 : wifi1 [ 106.887035] [ 106.887066] wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event [ 106.967135] num_rf_chain : 00000004 [ 106.967135] ht_cap_info: : 0000085b [ 106.967135] vht_cap_info : 339b79b2 [ 106.967135] vht_supp_mcs : 0000ffea [ 106.967166] ol_ath_service_ready_event: tt_support: 1 [ 106.967166] Peer Caching Enabled ; num_peers = 272, num_active_peers = 56 num_tids = 112, num_vdevs = 16 [ 106.967166] idx 0 req 1 num_units 0 num_unit_info 2 unit size 1208 actual units 273 [ 106.967447] idx 1 req 2 num_units 1 num_unit_info 4 unit size 256 actual units 57 [ 106.967478] idx 2 req 3 num_units 1 num_unit_info 4 unit size 1024 actual units 57 [ 106.967510] idx 3 req 4 num_units 1 num_unit_info 4 unit size 4096 actual units 57 [ 106.967697] idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35 [ 106.967791] idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1 [ 106.967822] idx 6 req 5 num_units 0 num_unit_info 2 unit size 2024 actual units 273 [ 106.968166] chunk 0 len 329784 requested ,ptr 0x57b00000 [ 106.968166] chunk 1 len 14592 requested ,ptr 0x5793c000 [ 106.968166] chunk 2 len 58368 requested ,ptr 0x57ad0000 [ 106.968166] chunk 3 len 233472 requested ,ptr 0x57b80000 [ 106.968197] chunk 4 len 107520 requested ,ptr 0x57ae0000 [ 106.968197] chunk 5 len 6144 requested ,ptr 0x5a764000 [ 106.968197] chunk 6 len 552552 requested ,ptr 0x57400000 [ 107.041080] wmi_ready_event_rx: WMI UNIFIED READY event [ 107.093252] ol_ath_connect_htc() WMI is ready [ 107.093252] ol_ath_set_host_app_area TODO [ 107.093345] target uses HTT version 2.1; host uses 2.1 [ 107.098219] ol_ath_attach() connect HTC. [ 107.098219] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. [ 107.098250] ol_regdmn_getchannels: cc=0 wMode=0xFFFFFFFF xchanmode=0x0 [ 107.098250] isCountryCodeValid: EEPROM regdomain 0x0 [ 107.098250] <7>regdmn=59 5Gdmn=0x160 [ 107.098250] <7>regdmn=59 2Gdmn=0x199 [ 107.098281] <7>modesAvail=0x680C [ 107.098281] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150 [ 107.098281] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140 [ 107.098281] <7>current mode 4 flags 0xA0 next 0 [ 107.098313] <7>current mode 8 flags 0xC0 next 13 [ 107.098313] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0 [ 107.098313] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150 [ 107.098313] <7>current mode 2048 flags 0x10080 next 26 [ 107.098344] <7>current mode 8192 flags 0x20080 next 39 [ 107.098344] <7>current mode 16384 flags 0x40080 next 48 [ 107.098344] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100 [ 107.098344] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100 [ 107.098344] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100 [ 107.098375] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100 [ 107.098375] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100 [ 107.098375] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100 [ 107.098375] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100 [ 107.098469] isCountryCodeValid: EEPROM regdomain 0x0 [ 107.098500] <7>regdmn=1 5Gdmn=0x200 [ 107.098500] <7>regdmn=1 2Gdmn=0x200 [ 107.098500] <7>modesAvail=0x680C [ 107.098500] <7>ol_regdmn_init_channels: skip mode 0x2 flags 0x2150 [ 107.098500] <7>ol_regdmn_init_channels: skip mode 0x1 flags 0x140 [ 107.098500] <7>ol_regdmn_init_channels: skip mode 0x4 flags 0xa0 [ 107.098500] <7>ol_regdmn_init_channels: skip mode 0x8 flags 0xc0 [ 107.098531] <7>ol_regdmn_init_channels: skip mode 0x20 flags 0xd0 [ 107.098531] <7>ol_regdmn_init_channels: skip mode 0x40 flags 0x150 [ 107.098531] <7>current mode 2048 flags 0x10080 next 0 [ 107.098562] <7>current mode 8192 flags 0x20080 next 46 [ 107.098625] <7>current mode 16384 flags 0x40080 next 92 [ 107.098719] <7>ol_regdmn_init_channels: skip mode 0x1000 flags 0x10100 [ 107.098719] <7>ol_regdmn_init_channels: skip mode 0x8000 flags 0x20100 [ 107.098719] <7>ol_regdmn_init_channels: skip mode 0x10000 flags 0x40100 [ 107.098719] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100 [ 107.098719] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100 [ 107.098750] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100 [ 107.098750] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100 [ 107.099281] OL Resmgr Init-ed [ 107.099343] ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna. [ 107.099343] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. [ 107.099375] ol_if_dfs_setup: called [ 107.099375] ol_if_dfs_attach: called; ptr=d8f3a3a4, radar_info=d9fc1c48 [ 107.099781] ol_ath_attach() UMAC attach . [ 107.099781] ol_if_dfs_configure: called [ 107.099812] ol_if_dfs_configure: UNINIT domain [ 107.099812] ol_if_dfs_disable: called [ 107.099812] ol_ath_attach: Calling ol_if_dfs_configure [ 107.099812] [ 107.099812] BURSTING enabled by default [ 107.099875] __ol_ath_attach: init tx/rx TODO [ 107.099875] __ol_ath_attach: needed_headroom reservation 44 [ 107.100718] Fri Aug 26 14:23:40 2016:3 11.383849 Client Match: IAP client match init on wifi1 [ 107.101062] ol_ath_thermal_mitigation_attach: ++ [ 107.101093] ol_ath_thermal_mitigation_attach: -- [ 107.101124] wifi1: Base BSSID f0:5c:19:21:dc:80, 16 available BSSID(s) processor ID: 0 [ 107.101124] eth0 address=f0:5c:19:ca:1d:c8 [ 107.101124] br0 address=f0:5c:19:ca:1d:c8 [ 107.101124] wifi1: AP type AP-325, radio 1, max_bssids 16 [ 107.101187] Fri Aug 26 14:23:40 2016:4 11.384286 Radio1: EIRP (Config: 0.0dBm, Set: 0.0dBm, AP Max: 0.0dBm, Reg Max: 14dBm, Override AP Max: 127.5dBm), Conducted Power Set: 0.0dBm, Gain: 0.0dBm [ 107.101343] Init the PCAP for radio1 offload 1. [ 107.104904] Initializing Pktlogs for 11ac [ 107.104935] Initializing Pktlogs for 11ac [ 107.796219] [wifi1][22 46 255]: [ 107.796219] FWLOG: [109422] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x518, 0x518, 0x0 ) [ 107.796251] [wifi1][22 46 255]: [ 107.796251] FWLOG: [109422] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x518, 0x518, 0x0 ) [ 107.796282] [wifi1][22 46 255]: [ 107.796313] FWLOG: [109422] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x518, 0x518, 0x0 ) [ 107.796344] [wifi1][22 46 255]: [ 107.796344] FWLOG: [109422] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x518, 0x518, 0x0 ) [ 111.229678] Kernel watchdog refresh ended on core 1. [ 111.281412] Kernel watchdog refresh ended on core 0. [ 124.758075] ol_ath_set_country: cc=0 wMode=0xFFFFFFFF xchanmode=0x0 [ 124.758075] isCountryCodeValid: EEPROM regdomain 0x0 [ 124.758106] <7>regdmn=59 5Gdmn=0x160 [ 124.758106] <7>regdmn=59 2Gdmn=0x199 [ 124.758106] <7>modesAvail=0x1F9001 [ 124.758138] <7>ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 [ 124.758138] <7>current mode 1 flags 0x140 next 0 [ 124.758169] <7>ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 [ 124.758169] <7>ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 [ 124.758169] <7>ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 [ 124.758200] <7>ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 [ 124.758200] <7>ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 [ 124.758200] <7>ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 [ 124.758200] <7>ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 [ 124.758200] <7>current mode 4096 flags 0x10100 next 25 [ 124.758231] <7>current mode 32768 flags 0x20100 next 50 [ 124.758263] <7>current mode 65536 flags 0x40100 next 62 [ 124.758294] <7>current mode 131072 flags 0x100100 next 74 [ 124.758325] <7>current mode 262144 flags 0x200100 next 99 [ 124.758325] <7>current mode 524288 flags 0x400100 next 111 [ 124.758356] <7>current mode 1048576 flags 0x800100 next 123 [ 124.758356] <7>Add VHT80 channel: 5210 [ 124.758356] <7>Add VHT80 channel: 5290 [ 124.758356] <7>Add VHT80 channel: 5530 [ 124.758388] <7>Add VHT80 channel: 5610 [ 124.758388] <7>Add VHT80 channel: 5690 [ 124.758388] <7>Add VHT80 channel: 5775 [ 124.758419] Skipping VHT80 channel 5825 [ 124.759137] ol_if_dfs_configure: called [ 124.759169] ol_if_dfs_configure: FCC domain [ 124.759169] ol_if_dfs_disable: called [ 124.760449] Fri Aug 26 14:23:57 2016:5 29.043518 Radio0: EIRP (Config: 0.0dBm, Set: 0.0dBm, AP Max: 18.0dBm, Reg Max: 29dBm, Override AP Max: 127.5dBm), Conducted Power Set: 0.0dBm, Gain: 0.0dBm [ 124.760512] Fri Aug 26 14:23:57 2016:6 29.043611 wifi0: Effective External Antenna Gain set to 3.5 (connector loss 0.0) [ 124.761886] ol_ath_set_country: cc=0 wMode=0xFFFFFFFF xchanmode=0x0 [ 124.761886] isCountryCodeValid: EEPROM regdomain 0x0 [ 124.761918] <7>regdmn=59 5Gdmn=0x160 [ 124.761918] <7>regdmn=59 2Gdmn=0x199 [ 124.761918] <7>modesAvail=0x680C [ 124.761949] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150 [ 124.761949] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140 [ 124.761949] <7>current mode 4 flags 0xA0 next 0 [ 124.761980] <7>current mode 8 flags 0xC0 next 13 [ 124.761980] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0 [ 124.761980] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150 [ 124.761980] <7>current mode 2048 flags 0x10080 next 26 [ 124.762011] <7>current mode 8192 flags 0x20080 next 39 [ 124.762011] <7>current mode 16384 flags 0x40080 next 48 [ 124.762043] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100 [ 124.762043] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100 [ 124.762043] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100 [ 124.762043] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100 [ 124.762074] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100 [ 124.762074] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100 [ 124.762074] <7>ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100 [ 124.762199] ol_if_dfs_configure: called [ 124.762230] ol_if_dfs_configure: FCC domain [ 124.762230] ol_if_dfs_disable: called [ 124.762542] Fri Aug 26 14:23:57 2016:7 29.045673 Radio1: EIRP (Config: 0.0dBm, Set: 0.0dBm, AP Max: 18.0dBm, Reg Max: 30dBm, Override AP Max: 127.5dBm), Conducted Power Set: 0.0dBm, Gain: 0.0dBm [ 124.762574] Fri Aug 26 14:23:57 2016:8 29.045704 wifi1: Effective External Antenna Gain set to 3.5 (connector loss 0.0) [ 124.805998] Fri Aug 26 14:23:57 2016:9 29.089097 wifi0: Effective External Antenna Gain set to 5.0 (connector loss 0.0) [ 126.189659] i am master now [ 126.210559] (14:23:59) !!! Init ---> Master [ 126.260543] asap_send_elected_master: sent successfully [ 153.984098] asap_send_elected_master: sent successfully [ 183.714245] asap_send_elected_master: sent successfully [ 213.821305] asap_send_elected_master: sent successfully [ 244.058075] asap_send_elected_master: sent successfully [ 274.228990] asap_send_elected_master: sent successfully [ 304.457200] asap_send_elected_master: sent successfully [ 334.386004] asap_send_elected_master: sent successfully [ 364.271540] asap_send_elected_master: sent successfully [ 394.689472] asap_send_elected_master: sent successfully [ 424.710996] asap_send_elected_master: sent successfully [ 454.614464] asap_send_elected_master: sent successfully [ 485.135801] asap_send_elected_master: sent successfully [ 515.145173] asap_send_elected_master: sent successfully [ 545.018837] asap_send_elected_master: sent successfully [ 575.430834] asap_send_elected_master: sent successfully [ 605.458575] asap_send_elected_master: sent successfully [ 635.798812] asap_send_elected_master: sent successfully [ 665.875351] asap_send_elected_master: sent successfully [ 695.741549] asap_send_elected_master: sent successfully [ 726.248516] asap_send_elected_master: sent successfully Driver Log -------------------------------------------------------- Current Log Level 3 Log Counter 10 Timestamp 637.631873 1 0.000000 Client Match: IAP client match init on wifi0 2 0.414964 Radio0: EIRP (Config: 0.0dBm, Set: 0.0dBm, AP Max: 0.0dBm, Reg Max: 0dBm, Override AP Max: 127.5dBm), Conducted Power Set: 0.0dBm, Gain: 0.0dBm 3 11.383849 Client Match: IAP client match init on wifi1 4 11.384286 Radio1: EIRP (Config: 0.0dBm, Set: 0.0dBm, AP Max: 0.0dBm, Reg Max: 14dBm, Override AP Max: 127.5dBm), Conducted Power Set: 0.0dBm, Gain: 0.0dBm 5 29.043518 Radio0: EIRP (Config: 0.0dBm, Set: 0.0dBm, AP Max: 18.0dBm, Reg Max: 29dBm, Override AP Max: 127.5dBm), Conducted Power Set: 0.0dBm, Gain: 0.0dBm 6 29.043611 wifi0: Effective External Antenna Gain set to 3.5 (connector loss 0.0) 7 29.045673 Radio1: EIRP (Config: 0.0dBm, Set: 0.0dBm, AP Max: 18.0dBm, Reg Max: 30dBm, Override AP Max: 127.5dBm), Conducted Power Set: 0.0dBm, Gain: 0.0dBm 8 29.045704 wifi1: Effective External Antenna Gain set to 3.5 (connector loss 0.0) 9 29.089097 wifi0: Effective External Antenna Gain set to 5.0 (connector loss 0.0) f0:5c:19:ca:1d:c8#