中文讨论区

Reply
Occasional Contributor II
Posts: 11
Registered: ‎04-15-2014

关于iap通过pppoe拨号上联配置失败的问题

hi,all

我在做iap通过pppoe拨号上联配置时,一直不成功,不知问题处在何处,请帮忙分析分析

 

iap:iap-103,rap-109

os:6.4.2.0-4.1.1.0

       6.4.2.6-4.1.1.7

       (以上2个版本都测试失败)

操作步骤:

1、dhcp pool--local(local L3也试过),网络栏改为10.1.1.0也无效

dhcp.png

2、pppoe配置

本地接口调用dhcp建立的pppoe

pppoe.png

3、新建了一个open ssid“PPPOE”,使用vc分配地址

ssid-vlan.png

4、重启之后,可以检测到pppe配置,但是不生效,如下截取信息

AP重启后:

(00:01:58) !!! Init ---> Master
asap_send_elected_master: sent successfully
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
ppp_device_event: dev ppp0 registered
ppp_device_event: dev ppp0 unregistered
ppp_device_event: dev ppp0 registered
ppp_device_event: dev ppp0 unregistered
ppp_device_event: dev ppp0 registered
User: ppp_device_event: dev ppp0 unregistered
ppp_device_event: dev ppp0 registered
ppp_device_event: dev ppp0 unregistered
ppp_device_event: dev ppp0 registered

 

AP LOG


Jan  1 00:06:05  cli[1810]: <341004> <WARN> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  launching pppoe for ethernet uplink
Jan  1 00:06:05  cli[1810]: <341004> <WARN> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  pppoe probing.
Jan  1 00:06:05  cli[1810]: <341004> <WARN> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  uplink not yet connected, waiting
Jan  1 00:06:08  cli[1810]: <341272> <ERRS> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  ethernet uplink bond0 link up.
Jan  1 00:06:08  cli[1810]: <341166> <WARN> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  Get interface ppp0 ip: 0.0.0.0/0.0.0.0.
Jan  1 00:06:08  cli[1810]: <341005> <ERRS> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  ethernet up without ip address, setup ip now
Jan  1 00:06:08  cli[1810]: <341181> <WARN> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  Uplink bond0, setup ip for uplink - Ethernet.
Jan  1 00:06:08  cli[1810]: <341004> <WARN> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  launching pppoe for ethernet uplink
Jan  1 00:06:08  cli[1810]: <341004> <WARN> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  pppoe probing.
Jan  1 00:06:08  cli[1810]: <341004> <WARN> |AP 9c:1c:12:cf:02:36@169.254.68.160 cli|  uplink not yet connected, waiting
9c:1c:12:cf:02:36# qppp_device_event: dev ppp0 registered
ppp_device_event: dev ppp0 unregistered
ppp_device_event: dev ppp0 registered

 

 

 

% Parse error
9c:1c:12:cf:02:36# sho log ppp  

(5077) Using interface ppp0
(5077) Connect: ppp0 <--> br0
(5077) Couldn't increase MTU to 1500
(5077) Couldn't increase MRU to 1500
(5077) Warning - secret file /etc/ppp/pap-secrets has world and/or group access
(5077) ppp connection established.
(5077) REASON: Termination Request Received
9c:1c:12:cf:02:36#

如上提示“Couldn't increase MTU to 1500”何解??

 

请问使用哪个版本os,如何正确配置,实现iap的pppoe拨号??

 

 

 

 

Occasional Contributor II
Posts: 11
Registered: ‎04-15-2014

Re: 关于iap通过pppoe拨号上联配置失败的问题

uplink 优先eth0

Search Airheads
Showing results for 
Search instead for 
Did you mean: