中文讨论区

Reply
Aruba Employee

如何检查mesh网络中的传输和发送速率

Mesh Point 会通过频段a或者是b/g与父节点建立无线的回程连接,并最终连接到有线的网络。

为了检查传输速率,接收速率和最后接收的信噪比,最后响应的信噪比。可以通过以下步骤:

 

Step 1:

识别mesh point连接的父节点:

 

(STU2) #show ap mesh topo
Mesh Cluster Name: stu2-mesh
----------------------------
Name Mesh Role Parent Path Cost Node Cost Link Cost Hop Count RSSI Last Update Uplink Age #Children
---- --------- ------ --------- --------- --------- --------- ---- ----------- ---------- ---------
point:9c Point portal:be 1 0 0 1 32 4m:29s 26m:26s 0
portal:36 Portal - 0 0 0 0 0 3m:34s 3h:26m:34s 0
portal:be Portal - 0 1 0 0 0 27s 3h:26m:25s 1
Total APs :3
(R): Recovery AP. For Portals 'Uplink Age' equals uptime.


Step 2:

通过以下命令得到客户信息:

 

show ap debug client-table ap-name <name>


Example:

Tx rate : 36 Mbps

Rx rate : 48 Mbps

Last ACK SNR : 32

Last RX SNR: 26

(STU2) #show ap debug client-table ap-name portal:be

Client Table
------------
MAC ESSID BSSID Assoc_State HT_State AID PS_State UAPSD Tx_Pkts Rx_Pkts PS_Pkts Tx_Retries Tx_Rate Rx_Rate Last_ACK_SNR Last_Rx_SNR Tx_Timestamp Rx_Timestamp
--- ----- ----- ----------- -------- --- -------- ----- ------- ------- ------- ---------- ------- ------- ------------ ----------- ------------ ------------
00:0b:86:e2:c9:d1 stu2-mesh 00:0b:86:8b:7b:e8 Associated None 0x1 Awake (0,0,0,0) 935 1455 0 271 36 48 32 26 Fri Jul 4 14:18:30 2008 Fri Jul 4 14:18:30 2008

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: