AAA, NAC, Guest Access & BYOD

Gracefully Shutdown CPPM from Serial

Introduction : This article talks about gracefully shutting down the CPPM appliance

 

Environment : This applies to all versions of CPPM.

 

Configuration Steps :

 

Powering Off the System

Perform the following to power off the system gracefully without logging in:

1:  Connect to the CLI from the serial console via the front serial port using the null modem cable provided.

Use the following parameters for the serial port connection:

- Bit Rate: 9600
- Data Bits: 8
- Parity: None
- Stop Bits: 1
- Flow Control: None

User-added image

login: poweroff
password: poweroff

This procedure gracefully shuts down the appliance.

Version history
Revision #:
1 of 1
Last update:
‎07-08-2014 02:49 PM
Updated by:
 
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.