AAA, NAC, Guest Access & BYOD

How to Create users with Endpoint Admin privilege in CPPM 6.6.x
Requirement:

In previous versions of Clearpass (pre-6.6) , if we need to create custom privileges for operator login to Clearpass, we need to have the privilege level access set in XML and then Import it to Administration » Users and Privileges » Admin Privileges.



Solution:

With CPPM 6.6.x, we can add new Admin Privileges from the web UI and choose the level of access from the options in the list.



Configuration:

Navigate to Administration » Users and Privileges » Admin Privileges and Add a Admin Privilege as shown below

 

In the Policy Manager Tab, we can choose the level of access we need to provide. Here, we are allowing full Read/Write/Delete access to Endpoints and all other access disabled. After choosing the options, Click on Save.

 

Now, we have created the endpoint admin privileges, we shall create test user and login with the above privilege. Navigate to Administration » Users and Privileges » Admin Users and Create a user and select the privilege level as shown below

 



Verification

 

Login to CPPM with user "test" and the user will have Read/Write/Delete Access to Endpoints as shown below

 

Version History
Revision #:
2 of 2
Last update:
‎03-27-2017 02:19 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.