AAA, NAC, Guest Access & BYOD

With ECS high availability, how do I configure the Radius server IP address?

Product and Software: This article applies to all Aruba controllers, all ECS appliances, ArubaOS 3.1 and later, and ECS 3.1.8.50 and later.

 

When End Point Compliant System (ECS) high availability is configured, the radius server IP address configuration on the controller must not be the virtual IP of the high-availability cluster.

 

The primary Radius server on the Aruba controller must be configured to be the primary ECS server.

 

The secondary Radius server on the Aruba controller must be configured to be the secondary ECS server.

Version History
Revision #:
1 of 1
Last update:
‎07-02-2014 09:28 AM
Updated by:
 
Contributors
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.