Access Points

Reply
New Contributor

5.3.2 arm only using channels 1, 6, 11

Is there a way to set ARM to use more than channels 1, 6, 11 ?
Aruba

5.3.2 arm only using channels 1, 6, 11

Sure, you can modify the Regulatory domain profile and 'check' additional channels in there.

The caution would be (of course) that channels 1,6,11 are the only non-interferering/non-overlapping channels available at 2.4 GHz, if you modify the plan from there you will have the likelihood of introducing some additional level of interference between your own APs.

Re: 5.3.2 arm only using channels 1, 6, 11

If there is a real need, then use 1,5,9,13.

This is not possible for the US of course.

:D

If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: