Access Points

Reply
Occasional Contributor II
Posts: 31
Registered: ‎12-19-2010

AP 105 half power

Good morning :
I have an AP 105 and i want to make it operate with less than it's total power(for example half it's power)

can any one help me ??
Thanks in advance.
Guru Elite
Posts: 21,515
Registered: ‎03-29-2007

Re: AP 105 half power

Go to Configuration> Wireless.> AP Configuration. Edit the Ap-group that you are concerned with.

Expand RF management and click on either the 802.11a or 802.11g radio profile. Change the EIRP to half power (12), and click on apply in the lower right hand corner. Next go to the Adaptive Radio Management Profile (ARM) for that band and change the assignment to disable. Click on apply in the lower right hand corner to commit.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 31
Registered: ‎12-19-2010

Re: AP 105 half power

Ok thank You for help.:D
Search Airheads
Showing results for 
Search instead for 
Did you mean: