Access Points

Reply
Occasional Contributor II
Posts: 39
Registered: ‎07-10-2010

AP-125 Bootup Issue

I am facing issue with AP-125 not able to bootup via PoE. here is the log which i retrieved from console :


APBoot 1.0.8.3 (build 20343)
Built: 2008-12-27 at 17:03:46

Model: AP-12x
CPU: OCTEON CN50XX-SCP revision: 1
Clock: 500 MHz, DDR clock: 333 MHz (666 Mhz data rate)
Power: POE
POST1: passed
POST2: mem 3 (Mismatch at 80100000: Expected 80ef00ff got 80ef00fd) FAILED!
hanging...
### ERROR ### Please RESET the board ###

Have any one of you encountered this issue before?
Guru Elite
Posts: 21,269
Registered: ‎03-29-2007

Contact Support

This access point probably needs to be replaced.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 39
Registered: ‎07-10-2010

Re: AP-125 Bootup Issue

Hmm, thanks for the feedback.
I have already opened ticket with Aruba TAC Support, lets c what they come up with :)
Search Airheads
Showing results for 
Search instead for 
Did you mean: