Access Points

Reply
FMH
New Contributor
Posts: 3
Registered: ‎07-15-2011

AP-65 Telnet configuration

Is there a white paper out there some where with the commands or on how to set up a static IP on an Aruba AP65? I finally got into the interface using the SPOE cable but typing "help" as the command line it does not appear to be obvious on how to configure this.
Guru Elite
Posts: 21,566
Registered: ‎03-29-2007

Re: AP-65 Telnet configuration

Required without DNS or option 43:

setenv master
setenv serverip

Required without DHCP:

setenv ipaddr
setenv netmask
setenv gatewayip


Optional:

setenv dnsip
setenv name (AP name)
setenv group (AP group)


Type printenv to see what is configured.

You can also boot the AP up to a controller and statically set the ip address of the access point in the Configuration> Wireless> AP Installation Screen.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: