Access Points

Reply
Aruba Employee

AP-65 mounts in a 9/16 channel ceiling t-rail

A lot of our corporate offices seem to have 9/16 channel ceiling t-rails instead of the standard 15/16 or 9/16 dropped ceiling rails. I've jerry-rigged one installation so far by using the wall mount and some screws and nuts and sliding the screw head into the channel. But this isn't really a good way, in my opinion, of mounting the APs on this type of ceiling.

Does Aruba or any third parties have a real solution for mounting Aruba APs to a channel ceiling t-rail?
Occasional Contributor I

Re: AP-65 mounts in a 9/16 channel ceiling t-rail

We have a few locations with the channeled supports, and we've just used the wall mount on the actaul tile, using small bolts with a washer and wing nut on top to hold it in place. Not quite as clean as mounting on the grid, but it looks fine.

-Garrett
Aruba Employee

Re: AP-65 mounts in a 9/16 channel ceiling t-rail

Sounds like you went down the same road as I did. It would be nice though if Aruba would make a mount that would fit on the style grid. I'd even pay extra for it as an optional mount.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: