Access Points

Reply
Occasional Contributor I
Posts: 5
Registered: ‎02-15-2011

Adding the remote AP push the AP limits over the platform limit.

Hi when adding a new RAP2, I see this in the process logs

"Adding the remote AP RAP2 will push the AP limits over the platform limit."

If I reboot the controller all becomes well, but I don't want to have to do that every time I add a new RAP.

Controller is running 5.0.3.2

Any ideas on how to resolve this?

Thanks!

Steve
Aruba Employee
Posts: 571
Registered: ‎04-17-2009

Adding the remote AP push the AP limits over the platform limit.

Which controller are you using?
Thanks,

Zach Jennings
Occasional Contributor I
Posts: 5
Registered: ‎02-15-2011

Re: Adding the remote AP push the AP limits over the platform limit.

4704
Aruba Employee
Posts: 571
Registered: ‎04-17-2009

Re: Adding the remote AP push the AP limits over the platform limit.

Please run the following command and post the output:

show license-usage ap


Thanks,
Zach
Thanks,

Zach Jennings
Search Airheads
Showing results for 
Search instead for 
Did you mean: