Reply
Occasional Contributor II

Captive portal

Can I configure CP profile in order that it automatically switch to a certain server(web)

Thanks in advance:D
Moderator

Re: Captive portal

To enable redirection to a certain page before authentication (for example, to use an external server for authentication) you can set the URL for the external server in the "Login Page" section of the Captive Portal profile you are using.

To enable redirection to a certain page after authentication, you can set the URL for the external server in the "Welcome Page" section of the Captive Portal profile you are using.

In either case, you need to ensure:

- you prepend URL with http:// or https://
- you open up the pre or post authentication firewall policies (if applicable) on the Aruba controller.
- If doing external authentication, please refer to the user manual on how to ensure the external server can signal a role change to the Aruba controller upon successful authentication.

Regards,

Austin
Contributor II

Re: Captive portal

So the External Captive portal URL shoud be accessible in Pre auth condition rit ?

How we can achive this ?

I have a policy to pemit the External Captive portal IP for HTTP/S but still I am getting aruba captive portal
Contributor II

Re: Captive portal

I am getting a certificate error while redirecting to external captive portal server , anu clue ?
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: