Access Points

Reply
Occasional Contributor II
Posts: 69
Registered: ‎01-11-2010

I can't revert IAP105 after provisioning to thin ap

I convert the IAP105 to thin ap for testing with the controller 650 it is successful
then I want to revert but it isn't successful i reset button and see error as below
Guru Elite
Posts: 20,582
Registered: ‎03-29-2007

Re: I can't revert IAP105 after provisioning to thin ap

Please use the reset instructions from the user guide:

The reset button can be used to return the AP to factory default settings.. To reset the AP:
1. Power off the AP.
2. Press and hold the reset button using a small, narrow object, such as a paperclip.
3. Power-on the AP without releasing the reset button. The power LED will flash within 5 seconds.
4. Release the reset button.
The power LED will flash again within 15 seconds indicating that the reset is completed. The AP will now continue to boot with the factory default settings.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: