AirWave and Network Management

Reply
Occasional Contributor II
Posts: 17
Registered: ‎05-13-2009

AP's stuck in planned status in VisualRF

I have two AP's that are stuck in planned mode. They appear fine in both my controller and in the APs/Devices list. How do I get them out of Planned status?
Moderator
Posts: 1,244
Registered: ‎10-16-2008

Re: AP's stuck in planned status in VisualRF

To be sure, are you able to find the actual APs being monitored/managed in AMP? If so, then you can right click on the planned AP for a menu list. There should be a 'Match with Managed AP' option that will bring a drop down list of the available APs. Choose the desired AP from the pull down.

-Rob
AirWave Support



Rob Gin
Senior QA Engineer - Network Services
Aruba Networks, a Hewlett Packard Enterprise Company
Occasional Contributor II
Posts: 17
Registered: ‎05-13-2009

Re: AP's stuck in planned status in VisualRF

That worked perfectly. Thanks.
Search Airheads
Showing results for 
Search instead for 
Did you mean: