AirWave and Network Management

Reply
Occasional Contributor I
Posts: 9
Registered: ‎09-08-2011

SNMP for individual APs throughput

I am trying to setup MRTG to monitor individual APs throughput. But when I poll, I only get useful values for controller's interfaces, all AP interfaces returned a value of 0.

Do I need some kind of license to do it, or am I simply looking at the wrong place?

Controllers: Mobility 3600 ArubaOS 6.0.1.3
APs: 61, 105, 175P

command used to poll values
snmpwalk -v 2c -M /opt/local/mrtg-2/standard-mibs_6.1.2.2_29541 -c public 10.11.40.254

Part of the result:
RFC1213-MIB::ifOutOctets.4097 = Counter32: 1489473037 <- GE/0 on controller
RFC1213-MIB::ifOutOctets.4098 = Counter32: 3736995210 <- GE/1 on controller
RFC1213-MIB::ifOutOctets.4099 = Counter32: 3199615678 <- GE/2 on controller
RFC1213-MIB::ifOutOctets.4100 = Counter32: 4209429405 <- GE/3 on controller
RFC1213-MIB::ifOutOctets.24577 = Counter32: 0 <- GE/0 on an AP 24577
RFC1213-MIB::ifOutOctets.24578 = Counter32: 0
RFC1213-MIB::ifOutOctets.24579 = Counter32: 0
RFC1213-MIB::ifOutOctets.24580 = Counter32: 0
RFC1213-MIB...

RFC1213-MIB::ifInOctets.4097 = Counter32: 689877347
RFC1213-MIB::ifInOctets.4098 = Counter32: 4190648975
RFC1213-MIB::ifInOctets.4099 = Counter32: 339781910
RFC1213-MIB::ifInOctets.4100 = Counter32: 2816086610
RFC1213-MIB::ifInOctets.24577 = Counter32: 0
RFC1213-MIB::ifInOctets.24578 = Counter32: 0
RFC1213-MIB::ifInOctets.24579 = Counter32: 0
RFC1213-MIB::ifInOctets.24580 = Counter32: 0
RFC1213-MIB...

Any pointer would be very much appreciated.

Cheers
Kenneth
--
System Analyst
Renaissance College
Hong Kong
Guru Elite
Posts: 21,272
Registered: ‎03-29-2007

Re: SNMP for individual APs throughput


I am trying to setup MRTG to monitor individual APs throughput. But when I poll, I only get useful values for controller's interfaces, all AP interfaces returned a value of 0.

Do I need some kind of license to do it, or am I simply looking at the wrong place?

Controllers: Mobility 3600 ArubaOS 6.0.1.3
APs: 61, 105, 175P

command used to poll values
snmpwalk -v 2c -M /opt/local/mrtg-2/standard-mibs_6.1.2.2_29541 -c public 10.11.40.254

Part of the result:
RFC1213-MIB::ifOutOctets.4097 = Counter32: 1489473037 <- GE/0 on controller
RFC1213-MIB::ifOutOctets.4098 = Counter32: 3736995210 <- GE/1 on controller
RFC1213-MIB::ifOutOctets.4099 = Counter32: 3199615678 <- GE/2 on controller
RFC1213-MIB::ifOutOctets.4100 = Counter32: 4209429405 <- GE/3 on controller
RFC1213-MIB::ifOutOctets.24577 = Counter32: 0 <- GE/0 on an AP 24577
RFC1213-MIB::ifOutOctets.24578 = Counter32: 0
RFC1213-MIB::ifOutOctets.24579 = Counter32: 0
RFC1213-MIB::ifOutOctets.24580 = Counter32: 0
RFC1213-MIB...

RFC1213-MIB::ifInOctets.4097 = Counter32: 689877347
RFC1213-MIB::ifInOctets.4098 = Counter32: 4190648975
RFC1213-MIB::ifInOctets.4099 = Counter32: 339781910
RFC1213-MIB::ifInOctets.4100 = Counter32: 2816086610
RFC1213-MIB::ifInOctets.24577 = Counter32: 0
RFC1213-MIB::ifInOctets.24578 = Counter32: 0
RFC1213-MIB::ifInOctets.24579 = Counter32: 0
RFC1213-MIB::ifInOctets.24580 = Counter32: 0
RFC1213-MIB...

Any pointer would be very much appreciated.

Cheers
Kenneth




It does not require a license. You may not find that specific variable to monitor the ethernet interface of your AP, but go to support.arubanetworks.com. Click on Documentation> Software User & Reference Guides> AtubaOS> ArubaOS 6.0> ArubaOS 6.0 MIB Reference Guide. That PDF will have a list of all the variable that you can poll to get you started.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: