Aruba Apps

Reply
New Contributor

Bandwidth usage VIA VPN Clients

Hi All,

 

Is there any information about the (avarage) bandwidth usage of VIA VPN Clients? The VIA VPN Client (version 3.0.0.0.87840) connects in this case to a Aruba Controller 3400.

 

Thanks,

Charlotte

Highlighted

Re: Bandwidth usage VIA VPN Clients

I would imagine this varies massively between customers.
This would very much depend on:
- what your clients were doing over the VPN
- if the VIA client was configured to split tunnel traffic or not.

The VIA client sends the controller a keep-alive message every 15 seconds. So, with that in mind, the bandwidth the client itself uses is minimal.

Does that answer your question?

Or are you wanting to know about the overhead that the VIA client adds to the traffic that flows over the VPN? In which case, it's just IPSEC so (quickly googles) it adds about 10% give or take a few percent.
Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216 | AMFX #11
---------------------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
New Contributor

Re: Bandwidth usage VIA VPN Clients

Hi James,

 

I understand that it depends on the clients doing. The VIA Client is not set to Split Tunneling. Thank you for the information.

 

Thanks

Charlotte

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: