Aruba Apps

Reply
Occasional Contributor I
Posts: 8
Registered: ‎11-30-2015

RAP-155 use same network wired name when configured more than 1 RAP

Hi,

 I configured RAP-155 for remote Access, and I have the RAP around 4-5 devices

I assigned each RAP per 1 AP-Group.

I work fine for SSID Name , there is no issue about this

BUT when connected via wired , it use same name for all RAP.

 

How can I set diferent name for each wired network ?

 

Thank so much

Warinda

Guru Elite
Posts: 21,566
Registered: ‎03-29-2007

Re: RAP-155 use same network wired name when configured more than 1 RAP

Can you show us a screenshot?

'



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 8
Registered: ‎11-30-2015

Re: RAP-155 use same network wired name when configured more than 1 RAP

Hi,

please find the screenshot as attached file.

 

PS. all of AP-Group that use RAP-155 when connected via wired  they got same name "NSGT-PINTONG"

Thank you

Warinda

 

 

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: RAP-155 use same network wired name when configured more than 1 RAP

Is that the name of your internal domain ?

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 8
Registered: ‎11-30-2015

Re: RAP-155 use same network wired name when configured more than 1 RAP

No, it is the SSID name for the first RAP-155 that we had configured before,

As we seperate each RAP to 1 AP-Group , but when connecting via wired it shows same name.

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: RAP-155 use same network wired name when configured more than 1 RAP

Are you using the same VLAN on wired and on that SSID ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 8
Registered: ‎11-30-2015

Re: RAP-155 use same network wired name when configured more than 1 RAP

Yes it is, I used same VLAN on wired and SSID but different VLAn for each AP-Group

NSGT-PINTONG -- VLAN 57

SDD-Rempote -- VLAN 59

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: RAP-155 use same network wired name when configured more than 1 RAP

Have you tried changing the name of that SSID?

And if it gets reflected on the wire side.


The information listed in the wire connection status is usually obtained from the DNS server
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor I
Posts: 8
Registered: ‎11-30-2015

Re: RAP-155 use same network wired name when configured more than 1 RAP

Yes I did change, even I changed Whitelist from AP Group Remote-SDD to Remote-L2 

the SSID showed  NSGT-L2Remote but wired connect still show NSGT-PINTONG.

 

I'm wondering why the wired connection used that name? and where it gets from?

 

** we use internal DNS from controller and no any that name from our DNS server

MVP
Posts: 4,309
Registered: ‎07-20-2011

Re: RAP-155 use same network wired name when configured more than 1 RAP

Internal DNS from the controller ?
The controller doesn't have DNS capabilities .
What are you using for DHCP ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: