Aruba Apps

Reply

Via authentication Successful but Via client not connecting

Hi All,


I've got a problem where I'm configuring Via to authenticate against ClearPass. 

 

The Via client is authenticates and I see a successul auth in CPPM & a user in the correct role on the controller. I would expect the Via client to be connected at this point but it fails to connect and re-prompts the user to select a cert for authentication.

 

All the certificates used are from the same CA.

Via clients tested 2.3.3 & 2.3.4. (Windows)

Controller version 6.4.3.9

CPPM Version: 6.6.2

Have tried EAP-MSCHAPv2 and EAP-TLS

 

Though it'd mention it on here to see if someone had a similar issue?

 

Cheers

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: