Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor I
Posts: 8
Registered: ‎08-08-2011

6.1 to 6.2 upgrade tunking issue

Open SSID on vlan 7
WPA2PSK on vlan 4
IAP on vlan 4

Everything works fine on 6.1, when they IAP is upgraded to 6.2, the Open SSID on vlan 7 traffic is not bridged to the wire. The AP is plugged into an Aruba s2500 running Version 7.2.0.0

 

Here is the config on the switchport:

interface-profile switching-profile "IAP"

   switchport-mode trunk

   native-vlan 4

 

MVP
Posts: 1,394
Registered: ‎05-28-2008

Re: 6.1 to 6.2 upgrade tunking issue

[ Edited ]

 

regarding your s2500 - here is example of full cli command on how to interface-profile switching-profile should be built - ( u may try to add the trunk allowed vlan all command - and see if it's solved your issue)


interface-profile switching-profile {default|<profile-name>}
clone <source>
access-vlan <vlan id>
native-vlan <vlan id>
switchport-mode {access|trunk}
trunk allowed vlan [add|all|except|remove] <vlan list>
storm-control-bandwidth <50-100>
storm-control-broadcast
storm-control-multicast
storm-control-unknown
no {...}
exit

 

lets us know if it's solved your issue.

 

me

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Occasional Contributor I
Posts: 8
Registered: ‎08-08-2011

Re: 6.1 to 6.2 upgrade tunking issue

We have trunk allowed vlan allow all configured. This is something that works fine on 6.1, but not 6.2

Search Airheads
Showing results for 
Search instead for 
Did you mean: