Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 3
Registered: ‎06-20-2014

AP135 POWEROFF after eth0 disconnected from other side.

  1. our customer test IAP 135,they connected IAP 135 ETH0 TO A PC directly.When ETH0 port is not connected (for example, the PC connected to it is powered off), after some time, the AP will power off. Can we wake it up again through ETH0 (boot up the PC connected to it)?   and is this a wellknow issue?
MVP
Posts: 130
Registered: ‎06-11-2013

Re: AP135 POWEROFF after eth0 disconnected from other side.

You can uncheck the "Disable this SSID on uplink failure"-checkbox on the SSID.


Also check: http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Site-Survey-with-IAP-Manual/td-p/57274


ACMX#255 | ACMP | ACCP | AWMP
www.securelink.nl
Search Airheads
Showing results for 
Search instead for 
Did you mean: