04-14-2015 04:44 AM
Hey guys, I have some problems with a lAP-275-RW not working with PoE adapter. Directly via PoE enabled switch it seems to work just fine but not via an PoE adapter. I only get a red systemlight.
Manual says Power over Ethernet (PoE): 48 Vdc (nominal) 802.3at compliant source is needed but the PoE injector is just IEEE 802.3af compliant. Might that be the problem?
Solved! Go to Solution.
04-14-2015 05:40 AM
Yes it needs " Power over Ethernet (IEEE 802.3at compliant), 48VDC/0.6A "
You also have direct power input option with following options.
Either "PC-OD-AC-P-INT " or to customise your own cable you need to have "CKIT-OD-AC-P" .
Please feel free for any further help on this.
[Is my post helped you ? Give Kudos :) ]