Aruba Instant & Cloud Wi-Fi

Reply
Contributor I
Posts: 39
Registered: ‎02-26-2015

Aruba IAP-225 not sending the SSID to the Cisco ACS?

Folks,

I need some help with our Aruba IAP-225 device which is in a cluster. The cluster has 2 AP's in it.

The issue we are facing is that the Aruba IAP does not seem to send the SSID with the requests it forwards to the Cisco ACS.

I recollect a similar setting in the Aruba 7005 where we had to mention send the SSID and wanted to confirm if something similar is also present on the IAP-225.

Any comments/help on this one?

The ACS setting for the Aruba IAP and the Aruba 7005 is similar.

 

 

Thanks,

N.

 

Guru Elite
Posts: 8,191
Registered: ‎09-08-2010

Re: Aruba IAP-225 not sending the SSID to the Cisco ACS?

Do you have the Aruba dictionary imported into ACS?

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Contributor I
Posts: 39
Registered: ‎02-26-2015

Re: Aruba IAP-225 not sending the SSID to the Cisco ACS?

Hi Tim,

That has not been imported, is there a guide on how to do that? We are running ACS version 5.5.

 

Interestingly as I mentioned earlier the Aruba controllers i.e. 7005 and 7010 work fine.

 

Thanks,

 

Guru Elite
Posts: 20,578
Registered: ‎03-29-2007

Re: Aruba IAP-225 not sending the SSID to the Cisco ACS?

Try the page here:  http://alec.dhuse.com/?p=15

 

The attribute you are looking for is "Aruba-Essid-Name" (VSA 5).



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: