09-25-2013 10:06 AM
We have an Aruba Instant setup with a production SSID. Layer 3 for the SSID lives on a cisco router. While we only have 3-4 users authenticating on the SSID (via radius), we have been noticing the Cisco router arp table filling up the entire /24 address range. The arp table appears to have 1 mac address associated with several IP addresses in the arp table. We're running
09-25-2013 10:23 AM
Who owns that MAC? ALso, I would recommend a code upgrade as well...
Consulting Systems Engineer - ACCX, ACDX, ACMX
If you found my post helpful, please give kudos
09-25-2013 12:06 PM
The MAC during the last instance was from a macbook pro. After clearing the arp table and rebooting the AP with the active Virtual controller, everything started working again. But this is the 2nd time we've had to do this. I'll try upgrading the code as the next step.