Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 25
Registered: ‎07-02-2014

Can specific clients be forced to connect to 5Ghz

Can specific clients be forced to connect to 5Ghz? Perhaps via the CLI?

Occasional Contributor II
Posts: 25
Registered: ‎07-02-2014

Re: Can specific clients be forced to connect to 5Ghz

Or 2.4Ghz depending on troubleshooting needs?

MVP
Posts: 4,225
Registered: ‎07-20-2011

Re: Can specific clients be forced to connect to 5Ghz

There's no way to specifically forced certain clients to connect to a particular band.

Aruba uses Band Steering but this will apply to all devices.

You could also just enabled 5Ghz and disable 2.4 Ghz but this will not allow any 802.11g devices to connect.

Depending on the wireless card used on Windows Laptops you can configure the preferred band to use.
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: