10-19-2016 02:57 PM
I have an Aruba Instant AP (IAP-205s) that I have multiple SSIDs going to multiple VLANs. All of my networks are running great except my guest network. It is configured via the web interface choosing 'Guest', then 'Network Assigned' and 'Static'. On the security page I am using 'Internal - Authenticated'. For testing the network access is unrestricted.
DHCP is handled via a Windows Server. The client is getting an IP, default route and DNS servers and can aquire appropriate DNS for the Aruba IAP name that appears in the browser. When opening a browser I can see the redirect attempt (https://*IAPShortNmae*/swarm.cgi?opcode=cp_genera
Now for troubleshooting, if I change the 'Splash Page Type' to 'None' then everything connects and goes right through. In this state, I can also connect to and manage the IAP (by DNS shortname) so I know my network layer is working correctly. Also, interestingly, if I connect to the captive enabled guest network, but then change wifi networks to another while the page is still attempting to load (meaning I connected to another, non-captive portal SSID) then the captive portal will load appropriately.
I just need to make a Guest network based on the built in captive portal. Please help!
wlan access-rule MyCompany-Guest
rule any any match any any any permit
wlan ssid-profile MyCompany-Guest
banner-text "Welcome to MyCompany-Guest"
use-policy "Blah Blah Blah."
Let me know if there is something else you'd like from the config.
10-22-2016 02:42 PM
You should use "Virtual Controller Assigned" and "Default" for VLANs.
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs