12-08-2014 11:22 AM
I have 11 IAP-103's in my corporate network, running version 126.96.36.199-188.8.131.52_46936.
I've tried everything I can think of to get Chromecast to connect to my network, to no avail.
I'm allowing all traffic and have the Broadcast Filteriing option set to ALL.
We've upgrade the Chromecast firmware to the lastest as well.
What do I have to do to get this to work? I'd find it hard to believe that Chromecast isn't compatible with Aruba Instant.
Solved! Go to Solution.
12-08-2014 11:27 AM
Going through the initial set up process, it's able to see my wifi network and I get to the point of entering the SSID/Password (using WPA-2 Personal), click continue and it spins for about a minute before failing to connect
12-08-2014 03:46 PM
If you do try disabling it
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
12-09-2014 10:50 AM
HI Tim & Victor,
Do my settings look correct?
Reading this post, it appears an updatet to 6.4 was the fix.
I'm on 184.108.40.206-220.127.116.11_46936, but still no luck.
Thanks for your help
12-09-2014 05:15 PM
To anyone reading this post; THIS IS THE FIX
1. Ensure you've factory reset the Chromecast device
2. In the Aruba GUI, go to More-->Services
3. Under the Airgroup tab, check the Enable DLNA box
4. Under AirGroup Service, enable the following:
Everything else in this section remains unchecked/disabled
5. Go through the initial Chromecast setup process.
Done. My Chromecast is now able to join my corporate wirless network
12-24-2016 12:18 AM
I am trying to do this for the current version of the central.arubanetworks.com.
I cannot see any optons for the DLNA settings etc.
i am able to connect the IAP205 devices if i use an open Access Point. but not with a WPA2 password.
12-24-2016 03:39 AM
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base