Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor I
Posts: 5
Registered: ‎06-23-2014

Cisco sw and two of IAP135

Dear Guru, 

 

Kindly tell me your advice. This is first time to install Aruba AP. 

I have two questions for this.

- How to assign IP to manage for each APs?

- I want to mange these APs with single group. Is it possible?

 

 

Cisco side 

interface GigabitEthernet1/0/47
description To AP135#02
switchport trunk allowed vlan 1,101,103
switchport mode trunk

 

Aruba IAP 135 side (no Controller)

- Create SSID for employee

- Create SSID for guest 

 

 

thanks in advance..

 

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Cisco sw and two of IAP135

When your IAP comes up initially, you should see an SSID called "instant".  Connect to it and open a broswer.  That should redirect you into the management UI.  The default credentials are admin/admin.

 

Once in, go to System at the top and then you should be able to set a Virtual Controller IP address to manage the cluster.  

 

Creating your networks are done with a built in wizard as well.

 

Please see http://cloud.arubanetworks.com/instant-training for a complete training overview of the IAPs

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
Showing results for 
Search instead for 
Did you mean: