09-17-2014 05:50 AM
Hello. I wonder the network deployment using cloud service controllers.
If cloud service controllers(7005/7010) will be deployed in branch sites,
can I install general APs for remote service, not instant APs ?
Solved! Go to Solution.
09-17-2014 06:23 AM
Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
09-18-2014 01:11 AM
I have another question.
When 7005/7010 controllers will be installed in Branch offices, does it need to put mobility controller in HQ?
In case of that, controllers in branch offices are operating as slave, and a controller in HQ operates as Master, is it right ?
(Master means that it can config other controller(slave))
Or, If not, are 7005/7010 controllers configured by Management System(Airwave in Center) ?
09-23-2014 01:39 AM
That depends on your needs. If you have common configuration on the branches I'd probably use a dedicated master in a central site, make it redundant if budget allows, and configure the branchcontrollers as locals(slave).
Give each location their own AP-group where you specify them to terminate on the local controller in the AP system profile.
The other option you're mentioning is running an "all-master" deployment where each location will operate as a standalone master, they could be centrally configured through Airwave. This is a less common way to do it, I'd say personally.
Aruba: ACMX #537 ACCP | CWNP: CWNA CWDP CWSP