Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 21
Registered: ‎12-08-2014

Command line for nslookup CLI on IAP

Hello,

 

I am wondering if anyone can tell me what the command line is for the IAP's when SSH into an AP for DNS lookup is please.

 

Thank you

Guru Elite
Posts: 20,572
Registered: ‎03-29-2007

Re: Command line for nslookup CLI on IAP

Just ping the name:

IAP-335# ping www.yahoo.com
Press 'q' to abort.
PING fd-fp3.wg1.b.yahoo.com (98.138.252.30): 56 data bytes
64 bytes from 98.138.252.30: icmp_seq=0 ttl=47 time=37.6 ms
64 bytes from 98.138.252.30: icmp_seq=1 ttl=47 time=37.6 ms
64 bytes from 98.138.252.30: icmp_seq=2 ttl=47 time=37.5 ms
64 bytes from 98.138.252.30: icmp_seq=3 ttl=47 time=37.6 ms
64 bytes from 98.138.252.30: icmp_seq=4 ttl=47 time=37.6 ms



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 21
Registered: ‎12-08-2014

Re: Command line for nslookup CLI on IAP

Hi Colin

 

Thanks I did that and it worked however I ran into an issue where i could ping the host but not lookup pool.ntp.org so is wanted to know if there was a command from the AP that I could use for TShoot. Thanks

 

Joseph

Search Airheads
Showing results for 
Search instead for 
Did you mean: