02-18-2014 06:16 AM
I can´t conver an IAP 105 to AP 105
I log in to instant and put the ip address of my controller 10.9.4.99 and gett a message saying status not available.
What is the problem ? IAP need to ping the controller ? IAP does not have an IP, so how is the conversion done ? Does the IAP contacts the Aruba Controller?
I am not able to do the conversion
My controller is 3200xm ( 220.127.116.11) and IAP is :
9c:1c:12:c9:08:2c# show version
Aruba Operating System Software.
ArubaOS (MODEL: 105), Version 18.104.22.168-22.214.171.124
Can you help ?
Solved! Go to Solution.
02-19-2014 10:27 AM
I test it with another ap and both leds are green
CONNECTing . . .
Projectos e Consultoria Lda.
Rua Diogo de Silves, 33C
02-19-2014 10:32 AM - edited 02-19-2014 10:34 AM
What version of SW is running on your controller? May need to update.
What is the regulatory domain of your IAP? You can see that on the white part# sticker on the back of the AP. Ex: IAP-105-US.
What is the regulatory domain of your controller?
What Country Code are you setting for your APs?
Is the other, working, AP and IAP-105 or a regular AP-105?
02-19-2014 10:40 AM
Running 6.3 on Controller
Both are IAP ?s running PT country code
I?ve checked on Controller and all seem fine on the radios
I?ve never seen but could be a led error?
Because I see both radios UP in ap config on controller
IT User Support Specialist
Tel: +351 210 940 066
Mob: +351 916 158 228
Fax: +351 219 598 084
Av. do Forte, 12
Johnson Controls Portugal BE Lda, a company registered in Portugal. Avenida do Forte, Edificio Tetrapak, Parish of Carnaxide, Oeiras, Portugal. Registered number: 505206790. For further details please click here.
This email transmission may be confidential and is intended solely for the person or organisation to which it is addressed. If you are not the intended recipient, you must not copy, distribute or disseminate the information, or act in reliance upon it. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of any organisation or employer. If you have received this message in error, do not open any attachment but please notify the sender and delete this message from your system. This email may be covered by legal, professional or other privilege. Please rely on your own virus check as no responsibility is taken by the sender for any damage arising as a result of any virus or similar infection contained herein.