Aruba Instant & Cloud Wi-Fi

Reply
MVP
Posts: 707
Registered: ‎12-01-2010

DHCP Option 60 and 43 settings in an Adtran DHCP serving switch

I think I have Option 60 ironed out, since the iAP is getting option 43 data.

I clearly have some work to do on the syntax for option 43.

 

Here's the outpup of "show dhcpc-opts"

*** 8/8/2013 18:02:37 PM    Target: 24:de:c6:c2:d4:e0    Command: show dhcpc-opts ***

-------------------DHCP option43 --------------------
017-wc1, Stores:017, 10.21.0.61, 12345

and the corresponding lines in the Adtran DHCP configuration:

ip dhcp-server pool "Management"
  network 10.22.140.192 255.255.255.192
  default-router 10.22.140.193
  lease 0 1 0
  option 60 ascii ArubaInstantAP
  option 43 ascii "017-wc1, Stores:017, 10.21.0.61, 12345"

 Any thoughts?

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: DHCP Option 60 and 43 settings in an Adtran DHCP serving switch

[ Edited ]

The syntax should look like this:

 

folder1:folder2,AirWave IP,shared secret

 

Use colons to separate folders/sub-folders for Airwave then use commas.  Be sure there are no spaces anywhere.

 

Try:

 

Stores:017,10.21.0.61,12345
MVP
Posts: 707
Registered: ‎12-01-2010

Re: DHCP Option 60 and 43 settings in an Adtran DHCP serving switch

Took a few days to get to test it, but I've made the change in the DHCP server, and did a "show dhcpc-opts"

output here:

dhcpOpt43no-workie.png

 

It's been up for 10 minutes or so, and it just checked in.

 

Thanks!

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
Search Airheads
Showing results for 
Search instead for 
Did you mean: