Aruba Instant & Cloud Wi-Fi

Reply
MVP
Posts: 740
Registered: ‎04-13-2009

Deny All role being assigned. Why?

Hi All,

 

I can see the Deny All role is being assigned to some clients from time to time. 

 

It's an instant network and there's no specific Deny All role configured.

 

Why would users be put in this role?

 

Blacklisted?

Max user limit reached on an AP?

 

Another reason?

 

Cheers

James

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: Deny All role being assigned. Why?

Hi,

 

Which authentication is configured, dot1x or both MAC+dot1x and also can you share what is the image version of the IAP.

 

please share the required information.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
MVP
Posts: 4,010
Registered: ‎07-20-2011

Re: Deny All role being assigned. Why?

I noticed this the other day on a mac auth setup and the user failed authentication and received the Deny All role
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 740
Registered: ‎04-13-2009

Re: Deny All role being assigned. Why?

There's no MAC auth in the deployment I was looking at.

Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
MVP
Posts: 4,010
Registered: ‎07-20-2011

Re: Deny All role being assigned. Why?

Did the user received this role after failing auth ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 25
Registered: ‎06-23-2011

Re: Deny All role being assigned. Why?

Dear All,

 

I have the same issue, i am using MAC-Auth on one of the SSID. Most of the user are connected and getting the normal role. But some of the users are getting deny all role? why it is happened?

 

I am using IAP-105

Guru Elite
Posts: 19,964
Registered: ‎03-29-2007

Re: Deny All role being assigned. Why?

You have to publish your config for us to understand what could be happening.

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
Search Airheads
Showing results for 
Search instead for 
Did you mean: