Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 1
Registered: ‎09-05-2014

Different CPU usage info under "show cpu details" and "show ap debug system-status"

Hello,

 

 I'm working on a case where many IAPs 115 are showing high cpu usage under the "show cpu details" with the process "sapd" taking 90%+ of it. I realized that the output of "show ap debug system-status" shows the same "sapd" process using 0%. This same situation is happening on almost all IAP's we have in this network (almost 40). Both commands were ran within a difference of seconds via a script. All IAPs are running 6.3.1.8-4.0.0.7. Is this the correct behaviour?

 

OUTPUT:

 

IAP1# show cpu details

 

Mem: 87952K used, 167984K free, 0K shrd, 0K buff, 18880K cached
Load average: 3.13 2.33 2.12 (Status: S=sleeping R=running, W=waiting)
PID       USER     STATUS    RSS     PPID    %CPU %MEM COMMAND
1591     root         S    N         9460    1511     84.3     3.6        sapd
16444   root         R <            360      16342   2.0        0.1        top

....

 

 

IAP1#show ap debug system-status

 

...

Output of top
-------------
Mem: 88192K used, 167744K free, 0K shrd, 0K buff, 18880K cached
Load average: 3.04 2.32 2.12 (Status: S=sleeping R=running, W=waiting)
PID        USER    STATUS    RSS    PPID     %CPU    %MEM COMMAND
16449   root        R N            360     16448    23.3         0.1       busybox
1587     root        S <             10640 1511      0.0            4.1       cli
1591     root        S N            9460    1511      0.0            3.6       sapd

...

 

Regards,

Filipi Zappas

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: