08-12-2014 01:20 PM
I have come across a proxy server called Litespeed a couple of times recently and it seems that it uses RADIUS accounting data to decide to allow/disallow users web access. One customer was using a controller so could simply tell the AAA profile to use litespeed as the Accounting server and freeRADIUS as the authentication server. However, the other customer was using instants and this doesn't seem to be an option.
Is it possible? Alternatively, is it possible to use CPPM to forward the Accounting data to a second server?
08-12-2014 05:23 PM
This isn't possible today.
Consulting Systems Engineer - ACCX, ACDX, ACMX
If you found my post helpful, please give kudos
08-13-2014 12:11 AM
Thanks Seth and Yan.
Yan: Do we have a release date? I suspect the customer would accept beta if that is available earlier.
Is there any way to do this on CPPM? I am happy to raise this in the Clearpass section of Airheads if that is more likely to get a response.
03-20-2015 10:28 AM
I was looking for an update as this is my exact problem currently.
I saw mention of a release version 4 and I know we are now on version 6 of the firmware, if I'm not mistaken.
My current setup is that I have serveral campuses with a virtual controller and local Radius server (which is NPS) but I have a central content filter which can take Radius accounting messages for a SSO purpose. I need to authenticate locally and send the accounting infomration to the remote content filter. This is an easy affair in my older Cisco untis and I am very much in need of it for my IAP virtual controllers.
If this is possible a little direction is needed.
03-24-2015 03:04 PM
this is avaible now in the 22.214.171.124 and later release of instant.
Just enable accounting and you can choose a specific account server to send the accounting to.
03-25-2015 06:48 AM
We are talking about the firmware of the Instant APs right?
I have enabled accounting on (3)Security of my Network's page but I don't see any options to specify the accounting server my firmware (while the Dell fork) is 126.96.36.199-188.8.131.52_46401 model AP105
This email, including any attachments, may contain confidential information which is intended only for the use of the individual(s) or entity named. If you received this e-mail message in error, please immediately notify the sender by e-mail and delete it. Dissemination, forwarding, printing or copying of this email without the prior consent of the sender is strictly prohibited.
03-26-2015 02:29 PM
yes the problem is your firmware: 184.108.40.206 you need 220.127.116.11 i think the recommended version is 18.104.22.168 for the early ones full firmware name: 22.214.171.124 - 126.96.36.199 this is also availble on the Dell Series.
04-02-2015 07:47 AM
Okay, I see, were talking about the FW numbers after the dash. I just did an update (and only one AP came back, whoops!) but it only took me to 188.8.131.52 wtih no new updates listed when I check..
I'll wait until dell catches up, thanks.
04-02-2015 07:50 AM
dont you have access to: download.dell-pcw.com
Dells always up to speed, just login an download latest firmware and do the upgrade.
We are also running Dell so..