Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 3
Registered: ‎01-14-2014

Disable the SSID in a time frame using Airwave

Hi,

I am looking for a detailed explanation/walkthrough of the Airwave configuration so that I can disable the broadcast of a SSID on a IAP during a specified time frame.

 

Any help is greatly appreeciated.

 

Thanks

MVP
Posts: 4,172
Registered: ‎07-20-2011

Re: Disable the SSID in a time frame using Airwave

 

See this thread:

 

http://community.arubanetworks.com/t5/Aruba-Instant-Cloud-Wi-Fi/Aruba-instant-disable-SSID-during-night-time/td-p/126369

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
New Contributor
Posts: 3
Registered: ‎01-14-2014

Re: Disable the SSID in a time frame using Airwave

I had seen that post earlier however, it doesnt explain how to do anything. I looked through my version of airwave(7.7.9) in the groups tab, I do not have a "template".

 

 

MVP
Posts: 1,394
Registered: ‎05-28-2008

Re: Disable the SSID in a time frame using Airwave

[ Edited ]

Where is the instantap templates?? --> I did some screenshots for u - (version 7.7.9)

1+2: go to groups - choose the right group

12.PNG

3. Then when u in the group itself - u should see templates in the menu

3.PNG

4. enjoy - edit / config - what u need:

4.PNG

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
New Contributor
Posts: 3
Registered: ‎01-14-2014

Re: Disable the SSID in a time frame using Airwave

OK finaly found the "templates", it wasnt visible because we had set "enable instan GUI config" to yes under the "basic" in the "groups" tab

 

Still not sure how to get this done though, What template, from where and how?

New Contributor
Posts: 3
Registered: ‎11-30-2011

Re: Disable the SSID in a time frame using Airwave

There is no easy way to disable a SSID based on timeframe.  You can modify the template to disable the ssid and then create a schedule on when to apply the change.  Depending on your requirement, you would then have to modify the template and schedule when to enable the ssid.

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: