03-12-2014 06:12 PM
Does IAP105 of ARUBA support repeater mode (WDS)?
I set up two AP in Stand-Alone and want to use it with a bridge of L2.
I know that there is Mesh mode.
However, I want to do wireless communication in the state that used IAP as standalone between AP.
I want you to tell me because there is not information.
Solved! Go to Solution.
03-12-2014 08:47 PM
i dont think thats supported...
But why you want to do that with wds instead of mesh?
If you want to use the IAP 105 and put it as a repeater of another brand ap thats not possible.
Product Manager - Aruba Networks
03-13-2014 05:13 PM
Thank you for a reply.
I know that IAP can have access to mesh.
I want to use it in slightly special environment.
The environment that the moving vehicle and fixed position can communicate in IAP of the setting. I communicate only when a vehicle approaches.
(with the need to make the association which can communicate early)
IAP has a controller function built-in by software.
However, each other is going to become Master when I leave it.
Therefore I use two IAP in StandAlone-Mode and want to communicate like Repeater.
I do not mind in environment of L2.
I want you to help me if there is any good advice !