Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 16
Registered: ‎03-15-2011

HP switchport configuration commands for Instant APs

We are deploying an Aruba Instant cluster in Europe, where the facility is HP switch/route.  Here in the US we are 100% Cisco in that space, so I have no experience configuring an HP switch.  We are setting up multiple VLANs to support AP management, internal production traffic and guest internet access.

 

The European facility currently has a flat network running on VLAN 1 and has no experience configuring multiple VLANs on HP gear.  What I'm looking for is help converting our Cisco IAP port configuration to an HP port configuration as follows, where VLAN 1 is for AP management, VLAN 618 is production, and VLAN 619 is guest internet:

 

interface gi1/0/24

 description Aruba AP

 switchport trunk native vlan 1

 switchport trunk allowed vlan 1, 618-619

 switchport mode trunk

exit

 

Guru Elite
Posts: 8,456
Registered: ‎09-08-2010

Re: HP switchport configuration commands for Instant APs

[ Edited ]

vlan 1 untagged 24

vlan 618 tagged 24

vlan 619 tagged 24

interface 24

name Aruba AP


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Guru Elite
Posts: 20,993
Registered: ‎03-29-2007

Re: HP switchport configuration commands for Instant APs


DFWisebaker wrote:

We are deploying an Aruba Instant cluster in Europe, where the facility is HP switch/route.  Here in the US we are 100% Cisco in that space, so I have no experience configuring an HP switch.  We are setting up multiple VLANs to support AP management, internal production traffic and guest internet access.

 

The European facility currently has a flat network running on VLAN 1 and has no experience configuring multiple VLANs on HP gear.  What I'm looking for is help converting our Cisco IAP port configuration to an HP port configuration as follows, where VLAN 1 is for AP management, VLAN 618 is production, and VLAN 619 is guest internet:

 

interface gi1/0/24

 description Aruba AP

 switchport trunk native vlan 1

 switchport trunk allowed vlan 1, 618-619

 switchport mode trunk

exit

 


Welcome to the world of HPE.  Below is a link to a doc that helps you translate between Cisco and HPE switching products:

 

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04793912



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 16
Registered: ‎03-15-2011

Re: HP switchport configuration commands for Instant APs

Spoiler
Thanks Tim & Colin.  I'll bookmark that link, I feel it will be needed down the road, as I believe all of our European facilities are HP switch/route.
Search Airheads
Showing results for 
Search instead for 
Did you mean: