Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 2
Registered: ‎12-15-2014

How do I disable the radios (as in turn off) on a IAP-225 via the CLI

I want to disable the radios on an IAP-225 via the comand line interface. Can someone tell me how to do this please.

Aruba
Posts: 1,287
Registered: ‎08-29-2007

Re: How do I disable the radios (as in turn off) on a IAP-225 via the CLI

I'm not sure if you can completely disable. What about just turning them into monitor mode? What's the reason for needing to completely disable?

If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
New Contributor
Posts: 2
Registered: ‎12-15-2014

Re: How do I disable the radios (as in turn off) on a IAP-225 via the CLI

My application is a re-packaged IAP-225 for commercial aircraft application.  Below 10K feet, the FAA requires intentional radiators, such as access points, to be disabled.  They are picky about a software solution vs a hardware soluton.

Aruba
Posts: 1,287
Registered: ‎08-29-2007

Re: How do I disable the radios (as in turn off) on a IAP-225 via the CLI

You should probably speak to your Aruba SE about that.  It may need some sort of custom build.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
MVP
Posts: 1,422
Registered: ‎10-25-2011

Re: How do I disable the radios (as in turn off) on a IAP-225 via the CLI

i know with 4.1+ you can disable the network but whether that turns off the radios I don't know.

If a complete turn off is required for both bands, then like Michael mentions, talk to you Aruba SE to see what can be done.

Maybe a custom C-Build will be required.
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: