Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor I
Posts: 8
Registered: ‎09-19-2012

How to configure RADIUS authentication through CLI?

I try configuring Radius authentication for Instant 93 through CLI

Config

aaa radius-server radius01 host 10.0.1.251 key abcdefg

aaa mgmt-authentication mode enable
aaa mgmt-authentication auth-server radius01

exit wr mem

Buy it does not work. I check the configuration on WebUI but nothing changes. Would you pls tell me what's the right process

 

Occasional Contributor I
Posts: 8
Registered: ‎09-19-2012

Re: How to configure RADIUS authentication through CLI?

I think command "wlan" for instant does not have "opmode" parameter. Is that means Radius server can not be configured for Instant

Moderator
Posts: 54
Registered: ‎08-29-2012

Re: How to configure RADIUS authentication through CLI?

Hi Jerry.

 

Radius authentication is supported in Aruba Instant for captive portal, 802.1x and management auth. Configuration through CLI in Aruba Instant is not officially supported.

 

Login to the UI, Goto PEF -> New and you should be able to create new radius server instant or you will be prompted to select or to create new Radius server instance in the SSID creation, this is depending on the type of SSID you are creating.

 

Thanks

 

CK

Occasional Contributor I
Posts: 8
Registered: ‎09-19-2012

Re: How to configure RADIUS authentication through CLI?

Thanks Ckok, So Radius auth can only be configured on WebUI. Am I right?

Moderator
Posts: 54
Registered: ‎08-29-2012

Re: How to configure RADIUS authentication through CLI?

Yes Jerry. 

Occasional Contributor I
Posts: 8
Registered: ‎09-19-2012

Re: How to configure RADIUS authentication through CLI?

Many thanks

Search Airheads
Showing results for 
Search instead for 
Did you mean: