Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 25
Registered: ‎07-02-2014

How to find current time on IAP and update with a new SNTP server?

CLI commands are preferrable.

 

Does anyone know of a simple way to do both ot these?

 

Thanks!

-Ryan

MVP
Posts: 4,164
Registered: ‎07-20-2011

Re: How to find current time on IAP and update with a new SNTP server?

Check the time:

IAP-1# show clock

 

Add new NTP server:

IAP-1 (config) # ntp-server 192.168.1.103

 

At this time you can't add a key 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Regular Contributor I
Posts: 171
Registered: ‎04-13-2009

Re: How to find current time on IAP and update with a new SNTP server?

# show clock

 

In the CLI

To configure an NTP server:

(Instant Access Point)(config)# ntp-server <name>

(Instant Access Point)(config)# end

(Instant Access Point)# commit apply

To configure timezone:

(Instant Access Point)(config)# clock timezone <name> <hour-offset> <minute-offset>

(Instant Access Point)(config)# clock summer-time <timezone> recurring <start-week> <start-day> <start-month> <start-hour> <end-week> <end-day> <end-month> <end-hour>

(Instant Access Point)(config)# end

(Instant Access Point)# commit apply

 

Source: http://www.arubanetworks.com/techdocs/InstantMobile/Advanced/Content/Chapter4%20Basic%20Configuration%20and%20Deployment%20Tasks/Configuring_an_NTP_Serve.htm

-------------------
ACDX, ACCP, CISSP, CWNA
Occasional Contributor II
Posts: 25
Registered: ‎07-02-2014

Re: How to find current time on IAP and update with a new SNTP server?

Thanks all!

Search Airheads
Showing results for 
Search instead for 
Did you mean: