Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 4
Registered: ‎02-28-2013

IAP 105 Country code issue

[ Edited ]

I have a device asking for the country code. This Aruba AP is located in the United State. There is no option to select USA.

 

I get this when I login to the GUI. I can't continue any further.

 

The device is at a remote site. I can ssh and added the command virtual-controller-country US but no luck.

 

Any clues?

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: IAP 105 Country code issue

[ Edited ]

You have a "Rest of World" version of the IAP-105.  A "Rest of World" version cannot be converted to a -US version.   You will need to work with your reseller and get a replacement IAP-105-US.  This is a Regulatory Domain issue and the -US version only allows channels we use in the US.

 

You can verify this by looking at the back of the IAP and you will see a small white sticker.  If it says "IAP-105" or "IAP-105-RW" that is your confirmation. 

New Contributor
Posts: 4
Registered: ‎02-28-2013

Re: IAP 105 Country code issue

I didn't see the label on the AP because I shipped it out to a remote site.

I'm getting the device RMA. Thanks for the feedback.

Search Airheads
Showing results for 
Search instead for 
Did you mean: