10-13-2015 06:22 AM
I hv configured IAP 105 in standalone mode. configured static ip on IAP interface (from vlan 10)
I hv configured "Corp" SSID for employee using static 10(vlan id), authentication method wpa2 enterprise with internal database.
There is no dhcp configured on my switch for vlan 10. i will assign static ip to wireless adapter. User is successfully authenticated.
I am able to ping gatewayip from AP cli but wi-fi client is not able to ping gatewayip.
Please suggest troubleshooting steps.
Thanks in advance..
Solved! Go to Solution.
10-13-2015 06:35 AM
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
10-13-2015 09:03 AM - edited 10-13-2015 09:05 AM
i am using 10.0.10.X/24 ip range for client and 10.0.10.1 IP for IAP access. Shall i need to configure IAP interface as trunk?
As i check, i am able to ping gatewayip 10.0.10.10 from IAP but i am not able to ping IAP ip from switch...
10-14-2015 06:56 AM - edited 10-14-2015 07:06 AM
After make switch port mode trunk i am able to ping my gatewayip.
But i lost IAP management access from lan as well associated wlan user.
do i need to configure management ip address? or do i need to configure uplink management vlan =10