05-20-2014 08:50 AM
I have an IAP 135 with a bad ENET0 and would like to use ENET1. This IAP is getting converted to a Campus AP and have not had any luck getting it to work with ENET1. Can I switch it over to ENET1 from the CLI?
05-20-2014 10:47 AM
Once the IAP is converted to a controller-based AP Eth1 is disabled by default. Eth1 is configured on a per AP group under Configuration -> AP Configuration -> Click on the AP Group you created -> AP ->Eth 1 ->Wired AP. I would suggest creating new profiles and not using the Default.