09-07-2012 08:21 AM - edited 09-07-2012 08:24 AM
We have setup with 4 IAP 93 running 18.104.22.168-22.214.171.124.
Is it possible to configure the IAPs so two of them use 2.4 GHz and the two other to use 5GHz?
Thanks from a newbie
09-07-2012 11:36 AM
You cannot split the IAP- 92/93 into two bands. The preferred band for IAP 92/93 is by default 2.4GHz but it can be changed via a global setting.
1. Log into the Web UI of the IAP
2. Click on Settings and under the "Preferred band" select 5GHz to make the IAP 92/93 work on 5 GHz.
3. APs will have to be rebooted in order for the change to take effect.
Hope this answers your question.
09-08-2012 03:20 AM
Thanks for your answer. I had hoped there would be some hidden CLI command that would help me out but apparently there isn't.
The odd thing is that some, not all, IAP change frequency without reboot after setting the UI, but it does't seem to be a stable workaround though.
09-11-2012 12:37 PM
I believe the OP is asking a different question that what has been answered. It sounds to me like he is asking if he can configure 2 of the IAPs for 2.4 and the other two for 5GHz. I realize these are single-radio AP's, but I don't think he is wanting to configure two bands on a single AP. Is that correct?
09-11-2012 12:57 PM