03-21-2013 08:56 AM
I know that IAP 93 doesn't support mesh links but, our seller tell us that we can configure IAP 93 as a point to point wireless bridge. How can i configure it?, i don't get it working.
Thank you in advance
03-21-2013 03:32 PM
From the userguide:
Mesh service is automatically enabled on 802.11a band for dual-radio IAP only, and this is not configurable.
As far as i aware - you need minimum iAP-105 to start using MESH and use the 802.11a in order to connect backual traffic between units.
Have a lovely night. :smileywink:
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
03-25-2013 01:58 AM
Hi, thank for you reply.
I know that IAP93 has no mesh support, but someone from Aruba tells me that i can configure two IAP92/93 as a wireless bridge, without client service. This is not Aruba mesh, is just a wireless bridge that i need between two buildings
04-23-2013 12:28 AM
Technical support send me a special firmware for doing this.
My experience with this firmware is that is really unestable and you have to use level 3 routing in the last AP of the bridge. For integration purposes this is a nigthmare.
This bridge only works on 2,4Ghz radio.
In my opinion, forget about using IAP 93 for point to point bridge.
04-23-2013 06:48 AM - edited 04-23-2013 06:49 AM
Mesh, on Instant, is only supported on our dual-radio models such as the IAP-105, 135, 175. It is not supported on single-radio like the IAP-93.
**Edit...oops. I just saw that someone else already mentioned that in an earlier post.