10-30-2014 03:24 AM
I setup a cluster containing 9 x IAP-224 with ANT-1Ws. When we tested the inside & outside communications theres a noticable latency periodically.In 30-35 sec interval there becomes a minimum 100ms latency , thus it makes hand-terminals disconnect from the server. It occurs in every 30-40 sec peroiods. I have tested with various devices.Also make the test simultaneously from a wired client connected to same switch as IAP.
What are the possible reasons to cause this issue ? I have tested w Broadcast-filter option enabled , same results.
Any help would be appreciated.
11-03-2014 04:07 AM
I will try this.
So ARM scan can cause this issue ? This is AP-225 , strongest device in Aruba family.Single AP doesnt pass the client count number of "10" so there is no real load in APs and I would say it isnt nice to hear that ARM can cause a problem like this.(if so..)
There is at least %95 connection quality on whole cluster. Any other idea ?
11-03-2014 04:46 AM
You should open a case up with TAC. I was just suggesting something to test to see if there is any difference. ARM is enabled in our enviornment with no issues, but I am only running IAP-105's. There are also artciles that provide assistance in network packet capture if you want to go further in depth to view which network traffic is going accross the AP's.