Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 11
Registered: ‎09-20-2013

IAP Mass Campus Conversion

I have 1 controller and 100 IAPs. Is there a way to mass convert all to a campus AP?

MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: IAP Mass Campus Conversion

 

You could split them 50 / 50  on two different subnets and then you could make the change from the Virtual controller and that should make the change to all the IAPs in that particular subnet .

 

 

 

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 11
Registered: ‎09-20-2013

Re: IAP Mass Campus Conversion

Thanks. Is that the only option you know of? There are several subnets that will be used.

MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: IAP Mass Campus Conversion

 

I'm not sure if it is still the case but there was a limitation on the cluster size to 64 they might have increased it.

 

That's probably the best way, but maybe somebody may have another idea

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Moderator
Posts: 681
Registered: ‎04-16-2009

Re: IAP Mass Campus Conversion

Only the IAP-9x series has a limitation on the number of IAPs per group (16).   The 64 IAP per group was an old "suggestion".  

 

You can have all 100 in the same group (must be in the same vlan) then log into the VC, check to see that all 100 are represented in the UI, go to Maintenance, Convert, point to the IP of the controller, then click convert now.   The controller should push controller based FW to all the IAPs.

 

Remember, now that they are controller based you will need licensing on the controller.

Search Airheads
Showing results for 
Search instead for 
Did you mean: